Kohler K-3394 Rough-Inplumbing, Roughing-Indimensions, Install Supply Stop, Double Wye, Bends

ROUGH-IN PLUMBING

Turn off the main water supply.

Install or relocate the supplies and outlets as necessary to conform to roughing-in dimensions. See Fig. #3 . For supply stop location, See Fig. #4 .

CAUTION: Risk of trap seal loss in

back-to-back installations. See Fig. #2 . To prevent possible trap seal loss, the back-to-back Pressure Lite toilet should be connected to a vertical stack using one of the following three fittings:

SDouble fixture fitting

SDouble combination wye and 1/8 bends

SDouble wye and 1/8 bends

Double	Double	Double Wye
Fixture	Combination	and 1/8
Fitting	Wye and 1/8	Bends
	Bends
	Fig. #2

ROUGHING-IN DIMENSIONS

3/4º

3-1/16º

116

30-1/2º	19-3/8º	FRONT OF BOWL
	2-3/4º
		16-1/4º
	19-1/4º
	14-3/4º
	2-5/8º	4-5/8º

12º	C		10º
	L OF OUTLET	3/8º I.P.S. SUPPLY	7-3/4º

Fig. #3

INSTALL SUPPLY STOP

For supply installation, refer to the instructions packed with the supply stop.

Locate the supply stop so it is 2-5/8º above the floor line, and 7-3/4º to the left of the centerline of the closet flange.

2-5/8º

12º

Supply Stop

7-3/4º

		Fig. #4
Kohler Co., Kohler, WI	3	113362-2-EA(9532)