Install new 1/4º or 5/16º diameter | |
|
Closet Flange
|
| Fig. #5 |
INSTALLATION |
|
|
INSTALL TOILET GASKET | Toilet Outlet | Gasket |
Carefully set the new toilet upside down on padding. |
|
|
Firmly install the gasket onto the toilet outlet. If using a |
|
|
gasket with an integral plastic sleeve, position the gasket |
|
|
with sleeve facing away from the toilet. |
|
|
If a rag or other plug is in the closet flange, remove the rag |
|
|
from the closet flange before setting the toilet. |
|
|
|
| Fig. #6 |
ALIGN AND SET TOILET
Carefully align and lower the toilet over the closet flange and
CAUTION: Risk of external leakage. Do not lift or
rock the toilet after placement ± a new toilet gasket must be installed if you break the watertight seal.
Apply full body weight to toilet rim to set seal.
SECURE TOILET
Install the bolt cap bases, washers, and nuts onto the exposed
CAUTION: Risk of personal injury or product damage. Overtightening may cause breakage or
chipping of the vitreous china.
Handtighten the nuts, then tighten them an additional
Install the bolt caps.
Fig. #7
Bolt Cap
Nut
Washer
Bolt Cap Base
Fig. #8
4 | Kohler Co., Kohler, WI | |
|