Seagate ST3400071FC, ST3500071FC manual Factory-installed accessories, Factory-installed options

3.5.1Programmable drive capacity

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select Parameter List table in the FC Interface Product Manual. Refer to the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not change the capacity it is currently formatted to have. A number in the number of blocks field that is less than the maximum number of LBAs changes the total drive capacity to the value in the block descriptor number of blocks field. A value greater than the maximum number of LBAs is rounded down to the maximum capacity.

3.6Factory-installed accessories

OEM standard drives are shipped with the NL35 Series FC Installation Guide (part number 100343674).

3.7Factory-installed options

You may order the following items which are incorporated at the manufacturing facility during production or packaged before shipping. Some of the options available are (not an exhaustive list of possible options):

•Other capacities can be ordered depending on sparing scheme and sector size requested.

•Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection against transit damage. Units shipped individually require additional protection as provided by the single unit shipping pack. Users planning single unit distribution should specify this option.

•The NL35 Series FC Installation Guide, part number 100343674, is usually included with each standard OEM drive shipped, but extra copies may be ordered.

•The Safety and Regulatory Agency Specifications, part number 75789512, is usually included with each standard OEM drive shipped, but extra copies may be ordered.

3.8User-installed accessories

The following accessories are available. All kits may be installed in the field.

•4 Gbit Fibre Channel Kit, part number 100364396

This kit contains an interposer board which allows the FC connector on the drive to be split into its compo- nent parts with one PS (5V, 12V) 4-pin Molex connector and 2 SFP (20-pin, 3.3V) data connectors. This alows a standard PC power supply and 2 HBA data channels to be connected directly to the drive.

•Single-unit shipping pack.

10 NL35 Series FC Product Manual, Rev. D