Seagate ST313030A, ST38420A, ST310231A, ST317240A, ST34310A manual What you need, Before you begin

2 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B

What you need

•Straight-edge and Phillips screwdrivers

•Four 6-32 UNC drive mounting screws

•An ATA interface cable (max length: 18 inches) with available 40-pin connector

•An unused drive power cable for your new drive

Before you begin

•Make sure your computer is turned off before you open the case.

•Read the handling precautions at the right and inspect the drive to make sure that it is not damaged.

•Save your foam-lined Seagate® disc drive box. This box has been approved by Seagate for shipping a Seagate disc drive. Using any other container or packing material voids your drive warranty.