Seagate ST9640423ASG Acoustics, Electromagnetic immunity, Test for Prominent Discrete Tones PDTs

Models: ST9500428AS ST9640422AS ST9750423ASG ST9750420AS ST9750420ASG ST9750424AS ST9640423AS ST9500424AS ST9640424AS ST9500423AS ST9640423ASG ST9500423ASG ST9750423AS ST9750422AS

1 44
Download 44 pages 3.42 Kb
Page 21
Image 21

3.11Acoustics

Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is conducted at room temperature (approximately 25°C). Emission levels are reported as the total A-weighted sound power levers for steady state, idle, and active seeks modes of operation.

Table 5: Drive A-weighted Sound Power Levels (SWL, BA)

Idle*

Performance seek

 

 

2.3 bels (typ)

2.6 bels (typ)

2.5 bels (max)

2.7 bels (max)

 

 

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Test for Prominent Discrete Tones (PDTs)

Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this pro- cess is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards.

*Defined as the median curve given by ISO 389-7 (Tf curve) minus 10dB at all frequencies.

3.12Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table:

Table 6:

Radio frequency environments

 

 

 

 

 

 

 

 

 

 

Performance

Reference

Test

 

Description

level

standard

 

 

 

 

Electrostatic discharge

Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV

B

EN 61000-4-2: 95

 

 

 

 

Radiated RF immunity

80 to 1,000 MHz, 3 V/m,

A

EN 61000-4-3: 96

 

 

80% AM with 1 kHz sine

 

ENV 50204: 95

 

 

900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz

 

 

Electrical fast transient

± 1 kV on AC mains, ± 0.5 kV on external I/O

B

EN 61000-4-4: 95

 

 

 

 

Surge immunity

± 1 kV differential, ± 2 kV common, AC mains

B

EN 61000-4-5: 95

 

 

 

 

Conducted RF immunity

150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz

A

EN 61000-4-6: 97

 

 

sine

 

 

 

 

 

 

Power Frequency H-field

1 A/m, 50Hz/60Hz, 3 axes

A

EN 61000-4-8: 97

immunity

 

 

 

 

 

 

 

 

Voltage dips, interrupts

30% Reduction for 25 cycles

C

EN 61000-4-11: 94

 

 

>95% Reduction for 250 cycles

C

 

 

 

>95%, 0.5 cycles

B

 

 

 

 

 

 

Momentus Product Manual, Rev. C

15

Page 21
Image 21
Seagate ST9640423ASG, ST9750422AS Acoustics, Electromagnetic immunity, Drive A-weighted Sound Power Levels SWL, BA

ST9500428AS, ST9640422AS, ST9750423ASG, ST9750420AS, ST9750420ASG specifications

The Seagate ST9750422AS, ST9750423AS, ST9500423ASG, ST9640423ASG, and ST9500423AS are part of Seagate's popular lineup of SATA hard drives designed for consumer and enterprise applications. These drives are recognized for their reliability, performance, and advanced technologies, making them suitable for a variety of storage needs.

The ST9750422AS and ST9750423AS models are 7200 RPM drives with a storage capacity of 750 GB, while the ST9500423ASG and ST9640423ASG offer different capacities and characteristics tailored for specific uses. The ST9500423ASG typically features a 500 GB capacity, while the ST9640423ASG is often found with 640 GB of storage space. These drives support the Serial ATA interface, ensuring high-speed data transfer rates and compatibility with a broad range of host systems.

All drives in this series feature a robust 32 MB cache that enhances performance by allowing faster access to frequently used data. This cache is critical, especially for read/write operations that require rapid data retrieval, making these models well-suited for tasks ranging from simple home computing to more intensive applications such as gaming and multimedia editing.

The ST9750422AS and ST9750423AS models are built with technologies such as Advanced Format, which improves storage capacity and enhances error correction. Additionally, these drives employ Seagate's PowerBalance and PowerFin technologies, enabling efficient power management without compromising performance.

Reliability is a core characteristic of the Seagate ST9XXX series, featuring a mean time between failures (MTBF) of over a million hours, which translates to increased system uptime and reduced potential for data loss. The drives also include features such as Native Command Queuing (NCQ), which optimizes the processing of multiple read/write commands, further boosting performance during heavy workloads.

In conclusion, the Seagate ST9750422AS, ST9750423AS, ST9500423ASG, ST9640423ASG, and ST9500423AS hard drives represent a blend of speed, reliability, and advanced technology, making them an excellent choice for users looking for dependable storage solutions. Whether for a home PC or an enterprise server, these drives continue to deliver outstanding performance and value in a competitive market.