3.0Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1Handling and static discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis- charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s exposure to ESD.

Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

Handle the drive only by its edges or frame.

The drive is fragile—handle it with care. Do not press down on the drive top cover.

Always rest the drive on a padded, antistatic surface until you mount it in the computer.

Do not touch the connector pins or the printed circuit board.

Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination.

3.2Jumper settings

3.2.1Master/slave configuration

Use the options jumper block shown in Figure 3 to configure the drive for operation. This jumper block is the 4-pin header adjacent to pins 1 and 2 of the I/O signal pins. For additional information about using the Cable select option, see Section 3.2.2.

The “Master or single drive” option is the factory default setting.

Drive is master (or single drive)

Drive is slave

Cable select

Figure 3. Jumper settings

Momentus 5400.2 Blade Server Product Manual, Rev. B

17

Page 23
Image 23
Seagate ST9100823AB manual Configuring and mounting the drive, Handling and static discharge precautions, Jumper settings

ST9808211AB, ST9100823AB, ST9408114AB, ST960822AB specifications

The Seagate ST960822AB, ST9408114AB, ST9100823AB, and ST9808211AB are notable hard disk drives (HDDs) that have made significant contributions to data storage technology. These drives are part of Seagate's extensive lineup, known for their reliability, performance, and innovative features.

The ST960822AB is a 2.5-inch HDD with a storage capacity of 60 GB. It is designed primarily for mobile computing applications, such as laptops and external drives. This model features a low power consumption design that enhances battery life, making it an ideal choice for portable devices. Its data transfer rates are competitive for its class, ensuring fast access to files.

Next, the ST9408114AB presents a slightly higher capacity of 40 GB, also within the 2.5-inch form factor. This drive was engineered for entry-level laptops and external storage solutions. Its Fluid Dynamic Bearing (FDB) technology allows for quieter operation and reduced vibration. With a 5400 RPM speed, it provides adequate performance for everyday tasks, including document storage and multimedia playback.

The ST9100823AB steps into the spotlight with a capacity of 80 GB, catering to users requiring more storage space for games, documents, and multimedia files. This HDD offers enhanced data integrity through Seagate's Advanced Power Management technology, which reduces power consumption without sacrificing performance. The ST9100823AB's consistent performance makes it suitable for both personal and professional use.

Lastly, there is the ST9808211AB, offering 80 GB of storage in a 2.5-inch format. It leverages similar technology as its counterparts but with improved data caching algorithms that allow for quicker access to frequently used files. This HDD is also built with durability in mind, suitable for environments that may experience shocks or vibrations.

All four models incorporate Seagate's commitment to quality with a focus on reliability and efficiency. They are equipped with features that prioritize speed, noise reduction, and power efficiency, making them excellent choices for varied applications in personal computing, gaming, and mobile storage. Collectively, the ST960822AB, ST9408114AB, ST9100823AB, and ST9808211AB represent a significant advancement in hard drive technology, serving users with diverse storage needs effectively.