48 | Cheetah 4LP Installation Guide, Rev. B |
WC/DC drives
Setting the SCSI ID jumpers
The SCSI ID for “WC” and “DC” model drives is normally set over the SCSI bus by the host system using connector contacts 39 (ID0), 40 (ID2), 79 (ID1), and 80 (ID3).
Terminating the drive
“WC” and “DC” model drives do not have internal terminators or any other way of adding internal termination to the drive. You must provide external termination to these drives when termina- tion is required.
