Sears 113.23611 manual Unpacking and checking contents

unpacking and checking contents

	TOOLS	NEEDED
COMBINATION SQUARE
		MEDIUM	PHILLIPS		SCREWDRIVER
	COMBINATION SQUARE MUST BE TRUE
		STRAtGHT		EDGE OF
		BOARD	3t4" THICK
DRAW	LIGHT	EDGE		MUST	BE
LINE ON BOARD		PERFECTLY		STRAIGHT
ALONG	THiS EDG_

LJ

/,

SHOULD BE NO GAP OR OVERLAP HERE WHEN

SQUARE IS FLIPPED OVER IN DOTTED POSITION

WARNING: FOR YOUR OWN SAFETY, NEVER CONNECT

PLUG TO POWER SOURCE OUTLET UNTIL ALL ASSEMBLY STEPS ARE COMPLETE, AND YOU HAVE READ AND UNDERSTAND THE SAFETY AND OPERA- TIONAL INSTRUCTIONS.

CAUTION: NEVER LIFT THIS SAW BY THE ARM WHICH HOLDS THE BLADE OR DAMAGE WILL OCCUR TO YOUR SAW.

Separate all parts from packaging materials and check each item with illustration and "Table of Loose Parts". Make certain

al! items are accounted for before discarding any packaging material.

if any parts are r_issing, do not attempt to assemble the Scroll Saw, plug in the power cord, or turn the switch on until the missing parts are obtained and installed correctly.

Table of Loose Parts			Qty.
t.	16" Scroll Saw		1
2.	Blade	Guard	1
3.	Owner's Manual		1
4.	Loose	Parts Bag (containing)
	Blade	.......................................	1
	Re-Oil	Caps	4
	Switch	Key	1

NOTE: Hardware to mount this scroll saw to a bench or leg set is NOT supplied. See mounting instructions for recommended hardware size.

	1
	¥
	DO NOT LIFT SAW BY THIS ARM
LIFT	2
HERE	¥

'N

3 4

LIFT HERE

5

II I