Sears 138.745 Starting/Stopping The Trimmer, Operating The Trimmer, See - 5, page, See , page

Models: 138.745

1 24
Download 24 pages 12.53 Kb
Page 7
Image 7
STARTING/STOPPING THE TRIMMER

1-888-266-7096

See Figure 4 - 5, page i.See Figure 3, page i.OPERATING THE TRIMMER If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.

See Figure 6, page i.Manual backgroundManual background Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

Manual backgroundManual backgroundManual background If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury.

Manual backgroundManual backgroundManual background Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

Manual backgroundManual backgroundManual background Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.

STARTING/STOPPING THE TRIMMER

See Figure 4 - 5, page i.

Attach the outlet end of an extension cord to the plug on the rear of the string trimmer.

NOTE: Use only approved outdoor extension cords. Route the extension cord through the slot located on the rear of the string trimmer housing and place underneath the cord retainer.

Remove supplied screw with a phillips screwdriver from the trimmer head.

Fit the grass deflector into the slots on trimmer head. Turn counterclockwise to lock grass deflector into place. Line up the screw hole in the grass deflector with the center hole in the trimmer head.

Install supplied screw and tighten by turning clockwise with a phillips screwdriver.

See Figure 3, page i.

Loosen and remove the knob from the handle. Install the handle on the rear handle pole in the area indicated by the illustration.

Adjust handle up or down, if necessary, to desired operating position.

Reinstall the knob. Tighten it to secure.

To start the string trimmer, press the switch trigger. To stop the string trimmer, release the switch trigger. If any parts are damaged or missing, please call 1-888-266-7096 for assistance.

OPERATING THE TRIMMER

See Figure 6, page i.

Folow these tips when using the string trimer:

Hold the trimmer with your right hand on the rear handle and your left hand on the front handle. Keep a firm grip with both hands while in operation. Trimmer should be held at a comfortable position with the rear handle about hip height.

Cut tall grass from the top down. This will prevent grass from wrapping around the shaft housing and string head.

If grass becomes wrapped around the string head:

Stop the trimmer.

Unplug the string trimmer.

Remove the grass.

Page 7
Image 7
Sears 138.745 manual Starting/Stopping The Trimmer, Operating The Trimmer, See - 5, page, See , page