Sears 172.10855 warranty Description, DESCRIPTION cont, KNOW YOUR CIRCULAR SAW Fig, REV 2-12-08

DESCRIPTION

KNOW YOUR CIRCULAR SAW (Fig. 3)

DESCRIPTION cont.

This Circular Saws have the following features: cont.

NOTE: Before attempting to use your saw, familiarize yourself with all of the operating features and safety requirements.

Your circular saw has a precision-built electric motor and it should only be connected to a 120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate

Fig. 3	Trigger Switch
Upper	Rear Handle
Blade Guard

Front Assist Handle

Motor Housing

on direct current (DC). This large voltage drop will cause a loss of power and the motor will overheat. If the saw does not operate when plugged into correct 120-volt,

60-Hz AC ONLY outlet, check the power supply. The saw has an 8-ft., 2-wire power cord (no adapter needed).

This Circular Saws have the following features:

1.9-10855 12 Amp, 4800 RPM (no-load speed) motor provides power and torque for fast, sure cuts in wood, plywood, hardboard and wood-base materials.

2.Quick depth-of-cut adjustments with a maximum depth of cut:

9-10855- 27/16-in. at 90°; 113/16-in. at 45°

3.Easy to read Bevel Cut Scale adjusts bevel capacity; 9-10855 ; 0° to 45°

4.Die-cast aluminum blade guards are epoxy coated for durability and extra strength

5.Extended length Trigger Switch with Power Lock-off Button for maximum control and comfort. Power lock-off button must be pressed in for trigger switch to turn saw “on”.

6.Large stamped Steel Base provides stability, glides smoothly

7.Ergonomically designed Rear Handle and Front Assist Handle provide positive gripping, control, balance and comfort.

8.Includes Craftsman® 24 tooth carbide-tipped steel combination blade.

9.Top mounted Blade Spindle Lock for easy blade changes.

10.Sawdust ejection chute helps direct dust and chips away from operator.

11.Permanently lubricated 100% ball bearings for smooth operation and long life.

12.Durable machined gearing for efficient power transmission.

	12
Lower Blade	Amps
Guard Lever

Blade Wrench

(stores in base)

Blade

Lower

Blade Guard

Spindle

Lock Button

Front Assist

Handle

Motor Housing

Depth-of-

Cut Scale

®

7 1

Spindle

Clamping

Screw

Base

	Bevel Scale
	Bevel Adjustment
	Locking Lever
	Base
	Edge Guide
Mounting Slots	Locking/retaining
	Screw
for Edge Guide
(sold separately)

Depth-of-Cut

Adjustment

Lever

Blade Wrench

(stores in base)

14

PRODUCT SPECIFICATIONS 9-10855

Input	12 Amps
Rating	120V, 60Hz AC
No Load Speed	4800 RPMs
Cutting Depth at 90°	27/16-in. (61.97mm)
Cutting Depth at 45°	113/16-in. (46.03 mm)
Maximum Bevel Angle	45°
Blade Diameter	71/4-in. (184 mm)
	15

REV 10855

2-12-08