ASSEMBLY & ADJUSTMENTS cont.
INSTALLING THE LITHIUM-ION BATTERY PACK (Fig. 4)
Fig. 4
Insert the battery pack into grass trimmer’s battery port. A simple push and slight pressure will be sufficient.
!CAUTION: When inserting batteries into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can result in leakage or explosion. (Applies to product employing more than one separately replaceable primary battery.)
!WARNING: This Cordless Trimmer is always in operating condition when the battery pack is installed. Therefore, the Safety On Button should always be in the released position locking the power off, when the tool is not in use or you are carrying it at your side. The trigger switch will not turn the trimmer ON until the Safety On Button is depressed.
!WARNING: To avoid injury, ALWAYS remove the battery from the trimmer BEFORE installing parts, cleaning the trimmer, making any adjustments or storing the trimmer
16
ASSEMBLY & ADJUSTMENTS cont.
INSTALLING THE SAFETY GUARD (Figs. 5 and 5a)
1.Remove the battery pack from the trimmer.
2.Turn the trimmer’s motor housing head over to provide access to underside base of the head by the cutting line spool.
3.Locate the single screw in the base of the head and remove the screw.
4.Insert the edge of the safety guard into the slot along the back of the trimmer’s head, carefullly lining the screw hole in the guard up with the screw hole in the trimmer head.
5.Insert screw and securely attach the safety guard (see Figs. 5 and 5a).
NOTE: Safety Guard will only fit one way.
Fig. 5 | Line | Fig. 5a |
| Cutter |
NOTE: THE SAFETY GUARD MUST BE ATTACHED to the trimmer head before use.
INSTALLING THE EDGE GUIDE | Fig. 6 |
WHEELS (Fig. 6) |
Your trimmer comes with a set of Edge Guide Wheels that is handy for use as a cutting guide. It can be used to help keep the cutting line away from items you don’t want cut, such as flowers, or damaged, such as fences or screens.
Each end of the wheel assembly guide is secured in its position on the motor housing with two screws, included, see Fig. 6. Check Edge Guide Wheels to make sure they are properly located and secure.
17