TO EMPTY THESOLUTION TANK | METHOD ! |
See Figure 11
When cleaning is completed, both the Recovery Ta nk and the Solution Tank should be emptied prior to storage. Empty the Recovery Tank as described earlier. There are three methods
of emptying the Solution Tank. Method 1:
1, Disconnect Short Cord from Recovery Tank.
2.Remove Recovery Tank from Solution 'rank and pour
solution out of the Filler Opening.
Method 2:
1.Place Floor Nozzle in bath tub or container,
2.Depress Solution Release Trigger and spray until empty. Method 3:
1, Remove Floor Nozzle and insert Wand into Solution
Tank through the Filler Opening.
2.Vacuum solution out.
3.All solution is now in Recovery Tank. Empty Recovery
Tank as described earlier. | METHOD 2 | METHOD 3 |
|
| i |
UPHOLSTERYNOZZLE
See Figure I2
Cleanmore Carpet Cleaner Upholstery Nozzle is an attach- ment for furniture upholstery cleaning. The upholstery nozzle may also be used to clean auto upholstery or carpet-
ing. In addition, the nozzle may be used to clean carpeted stairs and other areas difficult to clean with the normal floor nozzle,
FLOORTOOLS
See Figure 13
The Bare Floor/Carpet Brush (1) may be used on floors®®
without carpet for DRY cleaning with paper dust bag in- stalled.
The Squeegee Attachment (2) is useful for WET pickup.
CA UTION: DO NOT run the Pump Motor when using these attachments. To prevent Pump Motor from operating, make sure Pump Motor Switch is in "OFF" position, or unplug the Short Cord from the Solution Tank to the Recovery Tank,
