may or may not have vent caps. Vent caps are located on top of the bat- tery and provide a means to add distilled water when needed. Batteries should be marked with their type. If charging a battery that is not marked, check the manual of the item that uses the battery.

13.3CHARGE RATE BUTTON

Use this button to set the maximum charge rate to one of the following:

2A SLOW CHARGE RATE: Intended for charging small batteries such as those commonly used in garden tractors, snow mobiles and motorcycles. The 2A rate is not intended to be used as a trickle charger for larger bat- teries.

12A FAST and 30A RAPID CHARGE RATE: Use for charging automo- tive, marine, and deep cycle batteries. Not intended for industrial applica- tions.

80A START: Provides 80 amps for cranking an engine with a weak or run down battery. Always use in combination with a battery.

NOTE: To turn off the charger, unplug the power cord from the wall outlet.

14.using the built-in volt meter to test battery state of charge

OVERVIEW

This battery charger has a built-in volt meter to test your battery’s state of charge. The charger does not have a built in load tester. As such, a recently charged battery could have a temporarily high voltage due to what is known as “surface charge.” The voltage of such a battery will gradually drop during the period immediately after the charging system is disengaged. Consequently, the tester could display inconsistent values for such a battery. For a more accurate reading, the surface charge should be removed by temporarily creating a load on the battery, such as by turning on lights or other accessories.

14.1TESTING SEQUENCE: There are four basic steps required to test the battery state of charge:

1.Connect the charger battery clamps to the battery.

2.Connect the charger power cord to a 120V AC 2-prong wall outlet.

3.If necessary, press the Battery Type button until the correct type is indicated.

4.Read the voltage on the digital display or press the display mode but- ton to set the tester to Battery % to read the voltage as a percent of charge.

12

Page 14
Image 14
Sears 200.71225 operating instructions Charge Rate Button, Overview

200.71225 specifications

The Sears 200.71225 is a classic representation of consumer electronics from the late 20th century, particularly relevant to those who remember the impact of compact and efficient devices that met everyday needs. This versatile product embodies a range of features and technologies designed for convenience and functionality.

One of the primary characteristics of the Sears 200.71225 is its compact design. It was engineered to fit seamlessly in various environments, whether in a small apartment, a dorm room, or a family home. The dimensions allow for easy placement on desks, countertops, or storage shelves, making it an ideal choice for users with space limitations.

The 200.71225 is known for its user-friendly interface. The design focuses on simplicity, ensuring that even those who are not technologically savvy can navigate its features with ease. The control panel is clearly labeled, with large buttons that are easy to press. This emphasis on usability makes it accessible to a wide demographic, including children and the elderly.

In terms of technology, the Sears 200.71225 incorporates the latest advancements of its time, which may include solid-state components for reliability and durability. The integrated circuits are designed for optimal performance, enhancing the overall functionality of the device. Additionally, energy efficiency was a consideration in its design, allowing users to enjoy its features without significantly increasing energy bills.

The Sears 200.71225 also stands out in its versatility. It may come equipped with multiple functions, enabling users to perform a variety of tasks efficiently. This could include features like timer settings for various operations, enhancing its utility in everyday life. Whether it's a kitchen application, audio playback, or a simple home appliance, this device serves multiple purposes, making it a valuable addition to any household.

Durability is another key aspect of the Sears 200.71225. Built with quality materials, it is designed to withstand regular use, ensuring longevity and reliability. Maintenance is straightforward, with easy access for cleaning and repairs, which further adds to its appeal.

In conclusion, the Sears 200.71225 is a quintessential product that reflects the blend of practicality, technology, and user-centric design. Its compact size, ease of use, energy efficiency, multifunctionality, and robust construction make it a noteworthy choice for consumers looking for reliable electronics that seamlessly integrate into their daily lives. Whether as a nostalgic reminder of past innovations or as a practical solution today, the Sears 200.71225 remains a classic in the realm of consumer electronics.