![](/images/new-backgrounds/1209383/20938311x1.webp)
Axle Assembly (continued):
Place the charger on its side. Place one end of each bracket into slot, then place the axle assembly under each bracket. Fasten the other side of each bracket using the two,
Handle:
Turn the charger right side up onto its foot and wheels. Remove the two top screws from each side of the charger. Slide handle grip over handle tubing. Align the handle so the screw holes are aligned with the screw holes on each side of the wheel charger. Attach handle using the same screws.
Plugging it in
WARNING
Electrical Shock Hazard
Be sure that power cord fits properly into outlet. If not, have a qualified technician install a proper outlet. Never alter the AC cord or plug provided.
Improper connection can result in electrical shock.
Your charger should be grounded to reduce the risk of electrical shock.
Your charger is equipped with an electrical cord that has an equipment grounding conductor and a ground- ing plug designed to be used on a 120V circuit. The plug must be plugged into an outlet that has been properly installed and grounded in accordance with all local codes and ordinances.
A 3-Prong Grounded Wall Outlet
This Battery Charger includes GFCI protected outlets. Proper grounding is required for correct GFCI opera- tion.
WARNING
DO NOT exceed 15 Amps on GFCI Outlets. If using Battery Charger DO NOT exceed 3 Amps.
5