BEFORE USING YOUR BATTERY CHARGER
It is important to understand your charger's requirements. This section will tell you about your charger's electrical requirements and how to prepare a battery for charging.
ASSEMBLING YOUR CHARGER Included with your battery charger are two cord wrap posts for storage of the clamp cables.
To install, align the three tabs to correspond with the three receptacles and push until you hear a snap.
Wrap clamp cord after unplugging the |
| |
power cord and store your charger in a | Cord Wrap Cleat | |
dry location. | ||
|
SAFETY
OPERATION
PLUGGING IT IN
WARNING: Electrical Shock Hazard. Be sure that the power cord fits properly into the outlet. If not, have a qualified technician install a proper outlet. Never alter the AC cord or plug provided.
Improper connection can result in electrical shock.
Your charger requires a 120V receptacle installed according to all local codes and ordinances.
USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension cord, please make sure that you follow these guidelines:
•Make sure that the pins on charger's power cord fit firmly into the extension cord, and that the extension cord fits firmly into the receptacle.
•Check that the extension cord is properly wired and in good electrical condition.
•Make sure that the wire size is large enough for its length and for the AC ampere rating as specified in the chart below.
MINIMUM RECOMMENDED EXTENSION CORD
Length of Cord, in Feet | 25 | 50 | 100 | 150 |
|
|
|
|
|
AWG* Size of Cord | 18 | 16 | 12 | 10 |
|
|
|
|
|
*AWG=American Wire Gauge |
|
|
|
|
MAINTENANCE TROUBLESHOOTING
PARTS
5
