Maintenance and Care

PARTS

Charge Time Needed if Amp-Hours is Known

•Find the Charge Factor for your battery in the table on page 11.

•Multiply by the Amp-Hour rating of the battery.

•Divide by the Charger Setting (either 2 Amp or 12 Amp).

•Multiply by 1.25 to get the approximate Hours Needed to bring the battery to full charge.

Example: 15 Amp-Hour (AH) Battery, 50% State-of-Charge, 2 Amp Charger Setting

[(AH x Charge Factor) ÷ Charger Setting] x 1.25 = Hours Needed

(15 x 0.5 ÷ 2) x 1.25 = 4.7 Hours

•Find the Charge Factor for your battery in the table on page 11.

•Multiply by the Reserve Capacity rating of the battery.

•Divide by the Charger Setting (either 2 Amp or 12 Amp).

•Multiply by 0.73 to get the approximate Hours Needed to bring the battery to full charge.

Example: 95-Minute Reserve Capacity (RC) Battery, 25%

State-of-Charge, 12 Amp Charger Setting

[(RC x Charge Factor) ÷ Charger Setting] x 0.73 = Hours Needed

[(95 x 0.75) ÷ 12] x 0.73 = 4.3 Hours

To keep your battery charger working properly for years:

1. Clean the clamps each time you are	2. Coil the input and output cords neatly
finished charging. Wipe off any	when storing the charger. This will
battery fluid that may have come in	help prevent accidental damage to
contact with the clamps to prevent	the cords and charger.
corrosion.