Thermador POD302 manual Maintenance, Replacing an Oven Light, English

Models: POD302

1 48
Download 48 pages 38.29 Kb
Page 37
Image 37
Maintenance

Maintenance

Replacing an Oven Light

mCaution:Make sure the appliance and lights are cool and power to the ap- pliance has been turned off before replacing the light bulb(s). Fail- ure to do so could result in electrical shock or burns.

The lenses must be in place when using the appliance.

The lenses serve to protect the light bulb from breaking.

The lenses are made of glass. Handle carefully to avoid breaking. Broken glass could cause an injury.

Light socket is live when door is open.

Use only 10 Watt, 12 Volt bi-pin halogen light bulbs. These bulbs can be purchased through retail stores.

Use a clean, dry cloth to handle halogen light bulbs. This will increase the life of the bulb.

To replace the halogen bulb on the oven ceiling:

1.Turn off power to the oven at the main power supply (fuse or breaker box).

2.Remove the glass cover by unscrewing it.

3.Remove the halogen bulb and replace. Grasp the new bulb with a clean, dry cloth.

4.Screw the glass cover back on.

5.Turn power back on at the main power supply (fuse or breaker box).

To replace the halogen bulb on the oven sidewall:

1.Turn off power to the oven at the main power supply (fuse or breaker box).

2.Push the top mounting clip back and remove the glass cover.

English 33

Page 37
Image 37
Thermador POD302 manual Maintenance, Replacing an Oven Light, English