Sears 200.71486 manual Using the built-in light

5.4Charge the Portable Power 750 as soon as possible after each use.

Because the DC power outlet is internally wired directly to the internal battery, extended operation of a 12V DC device may result in excessive battery drain.

6.12v dc electrical device example run-time chart

Appliance Type	Estimated Power	Estimated
		Time*
Fluorescent Lights, Cellular Phones	4 Watts	20 Hours
Radios, Depth Finders, Fans	9 Watts	14 Hours
Camcorders, DVD Players, Spotlights	15 Watts	8	Hours
Electrical Tools, Bilge Pumps	24 Watts	5	Hours
Electric Coolers	48 Watts	2	Hours
Air Compressors, Car Vacuums	80 Watts	1	Hour

*NOTE: Estimated run-times. Actual time may vary. Times are based on the internal battery being new, fully charged and operated at room tem- perature.

7.using the built-in light

7.1Position the 750 on a flat, stable surface near the intended work area.

7.2Turn the Light/Display switch to the LIGHT position. The light will turn on and illuminate your work area.

NOTE: With a fully charged internal battery, the built-in light should provide 18 to 30 hours of continuous useful light, depending on ambient conditions.

7.3Turn the Light/Display switch to the OFF position when work is completed.

7.4Charge the 750 as soon as possible after using the built-in light.

• 4 •