Sears 200.71486 manual Led indicators

Models: 200.71486

1 8
Download 8 pages 12.93 Kb
Page 7
Image 7

8.led indicators

To check the internal battery status, press the switch on the front of the 750 to the DISPLAY position.

The LED lights will indicate as follows:

8.1A red light indicates a 50% or less charge and you should immediately charge the 750.

8.2A yellow light indicates a 50 to 75% charge. The 750 may be used, but should be charged as soon as possible.

8.3A green light indicates a 75% to 100% charge.

9.storage and maintenance important:

charge immediately after purchase

keep fully charged.

Charge the 750 internal battery immediately upon purchase, every 30 days and after every use.

All batteries are affected by temperature. The ideal storage temperature is between 40 and 70 degrees Fahrenheit. The internal battery will gradually self-discharge (lose power) over time more quickly in warm environments. Leaving the battery in a discharged state may result in permanent battery damage. To ensure satisfactory performance and avoid permanent dam- age, charge the internal battery every month.

When the JUMP START ON/OFF switch is ON, the clamps are live and will produce arcing or sparking if they come in contact with each other. To prevent accidental arcing, always keep the clamps on the storage holders and the JUMP START ON/OFF switch in the OFF position when not using it to jump start a vehicle.

9.1Replacing the built-in light To replace the built-in light bulb:

1.Turn the light off.

2.Insert a standard (flat-blade) screwdriver into one of the two slots along the bottom of the plastic lens and GENTLY pop the lens out. Repeat for the other side.

3.Gently grasp the bulb and twist counter-clockwise one quarter-turn to unscrew the bulb.

4.Insert a replacement bulb of the same type and rating, and twist clock- wise one quarter-turn to screw in the new bulb.

5.Replace the lens cover.

6.Test the light by switching the light on and off.

5

Page 7
Image 7
Sears 200.71486 manual Led indicators