Sears 200.71987 manual storage and maintenance important, charge immediately after purchase

9.5Remove the negative (first) and positive nuts and bolts securing the cable to the battery.

9.6Push cables to the side and carefully slide battery out of the 950.

9.7Reverse steps for assembly. Make sure that the nuts and bolts securing the cables are tight.

10.storage and maintenance important:

•charge immediately after purchase

•keep fully charged.

Charge the 950 internal battery immediately upon purchase, every 30 days and after every use.

All batteries are affected by temperature. The ideal storage temperature is between 40 and 70 degrees Fahrenheit. The internal battery will gradually self-discharge (lose power) over time, and more quickly in warm environ- ments. Leaving the battery in a discharged state may result in permanent battery damage. To ensure satisfactory performance and avoid permanent damage, charge the internal battery every month.

When the JUMP START ON/OFF switch is ON, the clamps are live and will produce arcing or sparking if they come in contact with each other. To prevent accidental arcing, always keep the clamps on the storage holders and the JUMP START ON/OFF switch in the OFF position when not using it to jump start a vehicle.

10.1Replacing the built-in light To replace the built-in light bulb:

1.Turn the light off.

2.Insert a standard (flat-blade) screwdriver into one of the two slots along the bottom of the plastic lens and GENTLY pop the lens out. Repeat for the other side.

3.Insert a replacement bulb of the same type and rating, and twist clock- wise one quarter-turn to screw in the new bulb.

4.Replace the lens cover.

5.Test the light by switching the light on and off.

10.2Customer Technical Assistance

Customer technical assistance is available Monday-Friday, 7 am to 4:30 pm Central Time by phoning 1-800-SEARS-64.

• 6 •