[] 8 Attach collarand flexiblehose to plenum.If additional

flexiblehose is required,an eightfoot lengthis availablethrough the partsdepartment,order281152-05. Beforetightening screws, insert damperbetween collar and plenum (Fig. 10). It shouldbe open for humidifieroperation.

Damper Blade beSlideshut

fore using air

Slide open at start of heating season.)

conditioning.

installation

WATER SUPPLY

[] 1 Water for the humidifier must be taken from a nearby

cold water line. Turn off the water supply. Drain by opening a fau- cet at a lower level of the line.

[] 2 Position the saddle valve on the water line as close to

the humidifier as possible.You have been supplied with 10 feet of 1/4" plastic tubing.

SPECIAL NOTE: When measuring the distance from the

 

saddle valve location to the humidifier, keep in mind that the

 

tubing must be supported; therefore, it must run along ceiling

J

J and walls. Measure along the path the tubing will follow.

I

9 Connect the flexible hose as shown using clamp pro- vided. Do not allow flexible tube to come within 3" of furnace flue pipe because of flue pipes extreme heat. If hose is under stress (pulling), it may be necessary to drill 2 holes in humidifier collar for screws. This will prevent clamp from slipping off (Fig. 11).

[] 3 Back out the piercing pin by turning the _ handle counter clockwise and then clamp the saddle valve body securely on the water line with rubber gasket positioned as shown (Fig. 13). On galvanized or copper pipe over 5/8", first ddll a 5/32' hole.

[ CAUTION: For safety,use a hand drillor grounded electricdrill. ,J

Screws(2)

In Collar

[] 10 It Is best to install an overflow line. Local codes may require overflow protection. The overflow is in the bottom of the humidifier reservoir (Fig. 12). Use 1/2" inside diameter rubber or plastic tubing to connect to nearby floor drain. (Tubing not sup- plied. Overflow tubing is available at your local hardware store.)

[] 4 Turn handle clockwise until it has pierced the water

line and valve is completely closed (Fig. 13).

[] 5 Partially uncoil the tubing. Slide the brass compres- sion nut over the tubing. The threads in the nut must face the tubing end. Place the brass compression sleeve as shown in Fig. 13. Slip brass insert into end of tubing.

[] 6 Insert the tubing end into the saddle valve at threaded stem "A" (Fig. 13) as far as it will go. Thraad the brass compres- sion nut onto the valve, then tighten gently with a wrench. Take care not to overtighten the nut.

BrassCompressionSleeve

=::O/ Brass Insert

Brass

Compression Nut

_

Overflow Drai_

[] 11

Install media wheel and reservoir tray in humidifier case

MOUNTING SADDLE VALVE

 

and engage latch on right hand side to valve body inlet stem.

Water Pipe

UAU

Rubber Gasket

(Stem Up)

6

Page 5 Page 7
Page 6
Image 6
Sears 2500 Installation, Water Supply, Screws2 Collar, BrassCompressionSleeve =O/ Brass Insert, Mounting Saddle Valve
Page 5 Page 7

2500 specifications

The Sears 2500 is a notable product that exemplifies the innovation and engineering prowess that Sears has cultivated over the years. Known for its versatility and reliability, the 2500 has made a significant mark in the home appliance market, catering to a diverse range of consumer needs.

One of the main features of the Sears 2500 is its robust design. Built with quality materials, it ensures durability and longevity, making it a trusted choice for households. The appliance comes equipped with a powerful motor, which delivers efficient performance, allowing users to complete their tasks swiftly and effectively.

Incorporating advanced technologies, the Sears 2500 is designed to optimize energy consumption. With its energy-efficient operation, it not only reduces electricity bills but also appeals to environmentally conscious consumers. The smart technology embedded in this model enables seamless integration with smart home systems, allowing users to control the appliance via mobile apps or voice commands. This connectivity feature adds convenience and enhances the user experience, aligning with contemporary lifestyles.

Another characteristic that sets the Sears 2500 apart is its user-friendly interface. The appliance features intuitive controls and a clear display, making it easy for users to operate. Even those who may not be tech-savvy can quickly adapt to the functionality, ensuring everyone can benefit from its features.

The Sears 2500 also boasts a range of customizable settings, allowing users to tailor its operation to meet their specific needs. This personalization not only enhances performance but also ensures that users can achieve the desired results for various tasks.

In addition to its functional capabilities, the Sears 2500 prioritizes safety. It includes built-in safety mechanisms that prevent overheating and electrical mishaps, giving users peace of mind during operation.

Overall, the Sears 2500 is a well-rounded appliance that combines quality, technology, and user-centric design. With its durable build, energy efficiency, smart features, and intuitive controls, it stands out in the competitive home appliance market. As consumers continue to seek reliable and advanced solutions, the Sears 2500 remains a top contender, representing Sears' commitment to meeting the evolving demands of modern households.
Top Page Image Contents