FULL ONE YEAR WARRANTY ON CRAFTSMAN CIRCULAR SAW
If this Craftsman Circular Saw fails to give complete satisfaction within one
Sears will repair it, free of charge.
If this circular saw is used for commercial or rental purposes this warranty applies for only 90 days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
SEARS, ROEBUCK AND CO.
DEPT. 698/731A
SEARS TOWER
CHICAGO, IL 60684
INTRODUCTION
DOUBLE INSULATION is a concept in safety, in electric power tools, which eliminates the need for the usual three wire grounded power cord and grounded supply system. Wherever there is electric current in the tool there are two complete sets of in-
sulation to protect the user. All exposed metal parts are isolated from the internal metal motor com-
ponents with protecting insulation.
IMPORTANT
sulation requires extreme care and knowledge of the system and should be performed only by a qualified
service technician. For service we suggest you return the tool to your nearest Sears Store for repair. Always use original factory replacement parts when servicing.
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL m Read owner's manual carefully. Learn its
applications and limitations as well as the specific potential hazards related to this tool.
2. GUARD AGAINST ELEC_'RICAL SHOCK BY PREVENTING BODY CONTACT
WITH GROUNDED SURFACES. For example: Pipes, radiators, ranges,
refrigerator enclosures.
3.KEEP GUARDS IN PLACE and in working order. Never wedge or tie lower blade guard open. Check operation of lower blade guard before each use. Do not use if lower blade guard does not close briskly over saw blade. WARNING: IF SAW
IS DROPPED, LOWER BLADE GUARD MAY BE BENT, RESTRICTING FULL RETURN. If lower blade guard becomes bent or damaged, replace it before reuse.
4.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
5.AVOID DANGEROUS ENVIRONMENT. Don't use power tool in damp or wet locations or expose to rain. Keep work area well lit.
6.KEEP CHILDREN AWAY. All visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension cord.
7.STORE IDLE TOOLS. When not in use, tools should be stored in a dry, high or
8.DON'T FORCE TOOL. It will do the job better andsafer at the rate for which it was designed.
Page 2
