SWITCH | REPLACEMENT | (CONTINUED) |
|
(MODEL | NOS. 315.175050 | AND 315.175060) | c |
See Figures 18 and 19. |
|
| |
•UNPLUG YOUR ROUTER.
FailureWARNING:to unplug your router could result in accidental 1 starting causing serious injury.
Remove screws (A) and handle cover (Bl, See Figure
| 18. |
|
|
|
| Note the location of the molded bend relief (C) on |
|
| |
| the power handle cord. Also note all wiring in the |
|
| |
| handle and how each lead is connected to the |
|
| |
| switch, Connections and wiring position must be |
|
| |
| identical when installing new switch. See Figure 18. |
|
| |
• | Remove leads from switch (D) by inserting a 1/32 in. |
|
| |
| diameter nail or pin into switch lead receptacle and |
|
| |
| pulling on lead as sRown in figure 19. Remove nail or |
|
| |
| pin with a twisting, pulling motion. |
|
| |
• | Make lead connections to new | switch. Push each lead |
| VARIABLE |
| as far as possible into proper switch receptacle. Pull on |
| ||
| VIOLET | SPEED | ||
| leads to check lead connections | with lead receptacles. | ||
|
| |||
•Locate switch in handle and place leads so they won't be pinched or contact screws when handle cover is replaced.
•Make sure molded bend relief (C) is correctly positioned in switch handle, then replace handle cover and screws.
•Tighten all screws securely.
D
Fig. 18
Fig. 19
Page 18
