Sears 385 - page 14

SECTION 2. PREPARE YOUR MACHINE FOR SEWING

• Presser Foot Types

Zigzag Foot Straight Foot

To Snap On

Pin

To Snap On the Presser Foot:

1. Ptace the presser foot so the hori-

zontal pin on the foot lies just

under the groove of the foot

holder.

2. Lower the presser foot holder to

lock the presser foot in place.

NOTE : If you do not hear the

presser foot snap in place,

press down on the presser

foot holder firmly until you

hear the snap.

A: Zigzag foot

Use this foot for both straight and zigzag

stitching.

Uses: Zigzag stitching (seepage 31),

Bar tacking (see page 33),

Button sewing (see page 35),

Rick-rack stretch (see page 36),

Three-step zigzag (see page 37),

Overcast stretch (see page38),

Lacework (see page 40),

Two-point shell stitching

(seepage 5_00),

Smocking (see page 51),

Stretch patching (see page51),

Fagoting (see page 52),

Herring bone stretch (see page 52),

Elastic stretch (see page 53),

Box stitching (see page 53),

Two-point box stitch (see page 54),

Overedging stitch (see page 54).

H: Straight foot

Use this foot exclusively for straight stitching

using center needle position only.

Uses: Straight stitching (see page 28),

Topstitching (see page 29),

Straight stretch (see page 30).

11

Contents

Main SEARS, ROEBUCK AND CO. Kenmore Sewing Machine IMPORTANT SAFETY INSTRUCTIONS DAN GER- SAVE THESE INSTRUCTIONS WAR NING- 6. TABLE OF CONTENTS Page SECT ON 1. KNOW YOUR MACHINE Identify the AccesSories J \- SECTION _2. PREPARE YOUR MACHINE FOR SEWING OPERATING INSTRUCTIONS "SECTION! 2:.'- _P__U R:M ACPI _ E__ Set Up the Machine (Continued) SECTION ,2. PREPARE YOUR MACHINE FOR SEWING 7 SECTION 2: _,.'_RI_i=_',/_I_QIJR!MACH|I_I_EJ_'J_J'NG_ Set Up the Machine (Continued) 2. Pull gently toward you. The extension table will snap out. 8 Page To Attach: 10 Page SECTION 2. :_,I_RE'_.,__='__WIN_ Know What the Presser Feet Will Do (Continued) 12 SECT ONe2 PREPARE YOUR MACHINE FOR SEWING Choose Your Needle and Thread 13 _N_ 2-2.5 (10-12 stitches per inch) To Change Your Needle Prepare the Bobbin SECTION !2; _PREPARE YOUR MACHINE FOR SEWING SECTION 2. PREPARE YOUR MACHIN6;.!P-O_fNG Prepare the Bobbin (Continued) @ 16 Prepare Your Top Thread Thread Your Needle --0-- 17 SECTION Page SECTION 2. 20 Stitch Selector ZONES Stitch Width Control 4- -- Reverse Stitch Control Starting To Sew 22 SECTION t 23 Practical Stitch Chart % 2-5 % <, <, 3-6 % %- % < 25 3_8 C_ % 26 2_5 c r _ % 2~6 Straight Stitches coT::. 28 \ Here's How 1. 29 SECTION 3. Darning oro LEARN THE STITCHES Straight Stretch 3O 7. When you finish darning, remove the darning plate and replace foot holder and foot. Zigzag Stitches !iiil Zigzag Stitches (Continued) 32 con ro,2,o Zigzag Stitches (Continued} HA 34 Back the fabric with paper or interfacing, Draw the letters on the fabric with tailor's chalk. If using paper, carefully remove it when you have finished sewing. 3. 4. Stitch several times. 35 Zigzag Stitches (Continued) Overcasting Stitch SECTION SECTION 3. LEARN THESTITCHES, Zigzag Stitches (Continued) NOTE: 38 Blind Hemming SECTION 3, Lace Work . YY Buttonhole Making _J Buttonhole Making (Continued) f+i ,, ,L_q Page Page <I zJ'" \ 45 Buttonhole Making (Continued) @ 47 Sew in a Zipper To Sew: 1. 48 3. Place the zipper teeth next to the 1/8"fold and pin in place. i Shell Stitching Two-Point Shell Stitching ,,,,ii, It 5O NN Smocking Stretch Patching Fagoting Stitch Herring Bone Stretch l,si_ 52 ,< SECTION3. LEARNTHESTITCHES Elastic / 53 i ,lll rop SECTION Two-point Box Stitch Overedging Stitch 54 This stitch is useful for elastic fabrics to join them together. This stitch can be used for a over- edgingstitch, iI , SECTION 4. PERFORMANCE PROBLEMS CHART What to Do When 56 SECTION;-4. PERFORMANCEPROBLEMSCHART Thread caught in hook race. Lint in bobbin holder or hook race. 57 SECTION 5. CARE FOR YOUR MACHINE" Replace the Light Bulb Clean the Bobbin Holder f 58 Clean the Hook Race and Feed Dogs SECTION 5. Oiling the Machine CARE FOR YOUR MACHINE % % G Page INDEX 62 Page Page Page WARRANTY