OPERATIONMAINTENANCE

CAUTION: VEHICLE BRAKING AND STABILITY MAY BE AFFECTEDWITHTHE ADDITION OF AN ACCESSORY OR AN ATTACHMENT.BE AWARE OF CHANGING CONDITIONS ON SLOPES.

1.Refer to the vehicle owners manual for instructions on safe operation on slopes.

2.Use the slope guide provided on page 11 of this manual to determine whether slope angle is too steep for safe operation.

3.For best handling and traction, distribute the weight of the load evenly in the cart.

4.Always test to make sure your vehicle has adequate towing and braking capabilities whenever hauling a substantial amount of weight in your cart. Use extra caution when operating on slopes.

1.At the beginning of each season, using a light machine oil, lubricate the latch, the latch pivot bolt, and the area of the axle where the draw bar tongue pivots.

2.At the beginning of each season, grease the wheel bearings. Apply grease through the grease fitting until grease if forced out through the ends of the wheel hub.

3.Check periodically for loose bolts.

4.Keep tires filled. Do not exceed maximum tire pressure of 10 Lbs.

NOTE

DO NOT EXCEED WEIGHT CAPACITY OF CART (See the specifications on this page.)

One cubic foot of dirt weighs approximately 80 lbs.

5.To dump material from the cart, release the spring latch on the tongue by pulling the latch lock lever forward, away from the cart. The cart bed will then tilt backwards to empty its contents. After emptying, pull the front of the bed down toward the cart tongue until the latch snaps into place.

6.The maximum towing speed for this cart is 20 m.p.h.

CAUTION: TO AVOID POSSIBLE

INJURY, BEFORE RELEASING THE

LATCH BE SURE THAT NO ONE IS

NEAR THE CART.

CART SPECIFICATIONS

Tires:

18" x 9.5" Pneumatic

Axle:

1" Dia. Steel

Capacity:

Up to 650 Lbs. Max.

Approx. Sh. Wt.

100 Lbs.

6

Page 6
Image 6
Sears 45-01754 owner manual Operationmaintenance