Sears 461-5949 operating instructions Dehumidifying Operating Instructions

Models: 461-5949

1 17
Download 17 pages 9.65 Kb
Page 10
Image 10

DEHUMIDIFYING OPERATING INSTRUCTIONS

Before Starting This Unit

Select a suitable location, making sure you have easy access to an electrical outlet,

Dehumidifying is a means of removing moisture from the air. A dehumidifier will help to protect your home and vetued possessions from damage caused by moisture (swelting) during high humidity conditions. Essentially a dehumidifier removes moisture from the air, as moist air passes over a dehumidi_ing coit (evaporator).

Moisture is condensed onto the evaporator, drained and collected inside an infernal water tank. The exhausted air being returned into the room environment is elevated several degrees causing the surrounding air temperature to increase (slightly). This proceSS also contributes to lowering the relative humidity of surrounding air.

Loostion:

To obtain maximum operating efficiency from your dehumidifier, the recommended (room ambient) operating temperature should be between 15.5°C/60"F - 32'C/90"F.

it is important to remember the efficiency of a dehumidifier

will be affectedlinfluenced by the rate at which new moisture is allowed to infiltrate the same space/area. To maintain efficiency, the dehumidifier must be operated in an enclosed area. Keep all doors and windows closed. '

Select a suitable location making sure there are no

obstructions restricting aiHIow st the front and back of the unit•

Installation:

1, Connect the power cord into a propedy grounded polarized 110/115 volt NC receptacle. (For your safety, please refer to grounding instrustions page 3):

2.Make sure the water tank is properly installed inside the cabinet, lithe (red) "water full" light starts flashing when the Unit is plugged in, the water tank is not properly installed.

3.When the unit is fir_ connected to a power supply, the (green) pilot light located directly above the "On/Of_ keypad will flash continuously (this is normal). The flashing light indicates the circuit board encountered a power failure/interruption (from being unplugged). The flashing light condition will cease immediately when the unit is switched on using the On/Off key pad and the unit will automatically default to the factory seffing previously described. The default setting cannot be re- programmed.

Dehumidifying:

The dehumidifier mode provides a feature thai will allow you the option of reading current room ambient temperatures in "Celsius" or "Faranheight"_

Follow these steps:

Oepress the MODE keypad. Each depression of the key pad will alternate through each of the optional modes. (DRY, HEAT, FAN). When the window adjacent to the "DRY" mode illuminates, the selection is complete.

Depress the _> keypad, allowing you to alternate between the *C/F RH settings adjacent to the LED display.

3.When the window adjacent to the "C illuminates, the LED will display the existing ambient room temperatures in "Celsius".

4.When the window adjacent to the "F iltuminates, the LED will display the existing ambient room temperatures in "Ferenheight".

5.When the window &djacsnt to the RH illuminates, the LED will display existing room humidity conditions as a "percentage" (%) value.

9

Page 10
Image 10
Sears 461-5949 operating instructions Dehumidifying Operating Instructions

461-5949 specifications

Sears 461-5949 is a well-regarded model in the realm of household appliances, specifically designed to offer reliable performance and efficiency for everyday tasks. As a part of Sears’ extensive catalog, this model exemplifies the company's commitment to delivering high-quality products that cater to diverse consumer needs.

One of the standout features of the Sears 461-5949 is its user-friendly interface. The appliance incorporates intuitive controls that allow users to easily navigate through various settings and options. This simplicity ensures that even those who may not be technologically savvy can operate the unit without hassle.

The model is equipped with cutting-edge technologies that enhance its functionality. For example, it may include energy-efficient mechanisms that help to minimize power consumption while maintaining performance. This feature is particularly beneficial as it not only reduces electricity bills but also contributes to environmental sustainability, an increasingly important consideration for modern consumers.

In terms of performance, the Sears 461-5949 is built to handle a variety of tasks with ease. Whether it's preparing food, performing laundry duties, or managing household chores, this appliance offers consistent reliability. Many users appreciate the durable construction of the unit, which is designed to withstand the rigors of daily use, ensuring longevity and value for money.

The design of the Sears 461-5949 is aesthetically pleasing, blending seamlessly with various kitchen and home decors. It typically features a sleek finish and compact dimensions, making it suitable for both spacious homes and smaller apartments. This adaptability is a significant advantage for consumers seeking to optimize their living spaces without sacrificing functionality.

Moreover, the Sears 461-5949 often comes with a range of additional features that enhance user experience. These may include programmable settings, automatic shut-off functions, and safety features that ensure peace of mind during operation.

In conclusion, the Sears 461-5949 represents a harmonious blend of efficiency, durability, and modern technology. Its thoughtful design and array of features make it a valuable addition to any household, providing users with the functionality they need to simplify their lives while ensuring their investment is built to last. As consumer preferences continue to evolve, models like the Sears 461-5949 remain a top choice for those seeking reliability and quality in their appliances.