ASSEMBLY
CARTON CONTENTS |
|
|
|
|
| |
1. | Boom Mount Bracket | 4. | Spray Gun Assembly |
| 7. | Hitch Brackets (2) |
2. | Lid | 5. | Boom Assembly |
| 8. | Axle |
3. | Tank with Frame Tubes | 6. | Hitch Arms (2) |
| 9. | Wheels (2) |
| 1 |
| 4 |
|
| 9 |
| 2 |
|
| 5 |
|
|
|
|
|
|
|
| |
|
| 3 |
|
|
|
|
|
| 6 |
| 7 | 8 |
|
|
|
|
|
| ||
|
|
|
|
|
| |
REMOVAL OF PARTS FROM CARTON
•Remove all parts and hardware packages from the carton. Lay out all parts and hardware and identify using the illustrations on pages 3 and 4.
TOOLS REQUIRED FOR ASSEMBLY
(2)1/2" Wrenches
(1)Screwdriver
(1)Pliers
(1)Hammer
•Assemble the axle through the holes in the frame tubes. You may need to slightly loosen the bolts in the frame tubes to make the axle fit. Retighten the bolts only enough to flatten the lockwashers. See figure 1.
•Assemble a spacer, a 1/2" flat washer, a wheel and another 1/2" flat washer onto the axle. Lightly tap a palnut onto the end of the axle. Repeat on other end of axle. See figure 1.
1/2" FLAT WASHER
SPACER
AXLE
PALNUT
FIGURE 1
•Assemble a hitch arm to the inside of a frame tube underneath the tank. Use two 5/16" x 2" hex bolts and 5/16" nylock nuts as shown in figure 2. Do not tighten yet. Repeat for other side.
5/16" NYLOCK NUT
5/16" x 2" |
|
HEX BOLT | HITCH ARM |
FIGURE 2
4