Sears 536.79751 owner manual Assembly

@

ASSEMBLY

i i , ill i uu ull um Hul,t

•	Place the upper handle on the lower handle (See		CLUTCH
	Fig. 3B) and secure	in place with two (2) 5/16-18 x	LEVER
	1-1/2 inch hex head	screws and two (2) 5/16-18

head head Iocknuts {found in parts bag)

• Insert one end of the control rod through the hole in

HAIR PIN

CONTROL

the clutch lever (See Fig° 4) and attach with a hair pin (found in the parts bag)°

ROD

)

@

oPlace the clutch lever in the first depth selection and insert the other end of the control rod through the hole inthe quill support arm (See Fig 4) Attach with hairpin (found in parts bag).

oMove the clutch lever to NEUTRAL position and latch into position,

NOTE: It may be necessary to loosen the four screws and nuts holding the lower handles to the frame (See Fig., 5). Pry up (forward) on the handles to allow the clutch

lever to freely enter the NEUTRAL position, Retighten nuts and screws.

HAIR PIN

UPPER HANDLE

I

QUILL SUPPORT

ARM

FIGo 4

5116-18HEX	5116-18 HEX
HEAD SCREW	SCREW

LOWER HANDLE

LOWER

HANDLE

RIGHT SIDE

LOWER HANDLE

VIEW FROM RIGHT SIDE OF UNIT

FIG. 3B

FIG. 5

7