Sears 580.75133 Opebatbon, How To Use Your Washer, Stopping Your Pressure Washer, Wand Extensions

OPEBATBON

HOW TO USE YOUR WASHER

IF YOU HAVE ANY PROBLEMS OPERATING YOUR PRESSURE WASHER, PLEASE CALL THE PRESSURE WASHER HELPLINE AT 1-800-222-3136.

STOPPING YOUR PRESSURE WASHER

ADJUSTABLE

NOZZLE

UTILITY

,,F

FIG. 6

oIf the pressure washer is running, press the ON/OFF switch (Fig 6)

oSimply shutting OFF washer will not release pres- sure in the system. Pull the trigger on the spray wand assembly to relieve the pressure in the hose_

NOTE: A small amount of water will squirt out when you release the pressure

WAND EXTENSIONS

Your high pressure washer comes equipped with a choice of three wand extensions -- one with an adjustable nozzle

(Fig. 7), one with a utility brush (Fig. 8) and turbo nozzle (Not shown)_ Remove the adjustable nozzle extension if you wish to use the utility brush. Attach the Brush Adaptor to the utility brush and then insert the threaded end into the spray gun and hand tighten.

ADAPTOR

FIG. 7 FIG. 8

HOW TO USE ADJUSTABLE NOZZLE

AWARNING: NEVER ADJUST SPRAY PATTERN WHEN SPRAYING. NEVER PUT HANDS IN FRONT OF SPRAY NOZZLE TO ADJUST SPRAY PAT- TERN.

With the adjustable nozzle you can adjust the spray pattern to be either high pressure or low pressure. You can also adjust the spray so it is concentrated in a stream pattern or expanded into a fan pattern. Use this nozzle to apply detergent

=Push the nozzle attachment forward when you wish to

adjust the spray to low pressure mode (Fig. 9) Pull the nozzle backward to achieve high pressure.

,,Twisting the nozzle adjusts the spray pattern from a narrow stream to an expanded stream.

NOZZLE IN HIGH	PUSH NOZZLE	FORWARD FOR	TWIST NOZZLE TO	TWIST NOZZLE TO NARROW
PRESSURE MODE	LOW PRESSURE MODE AND		EXPAND SPRAY STREAM	SPRAY STREAM
	DETERGENT	APPLICATION

FIG. 9