Sears 86030 Installation Guide, Grounding Instructions, Electrical Requirements, Extension Cord

Models: 86030

1 14
Download 14 pages 56.71 Kb
Page 4
Image 4
 INSTALLATION GUIDE

cord hang over edge of table or counter.

19.

Do not operate any heating or cooking

18. Use only thermometers, which are

 

appliance beneath this appliance.

specifically designed for use in microwave

20.

Be certain the glass tray and roller rings

ovens.

 

are in place when you operate the oven.

 GROUNDING INSTRUCTIONS ELECTRICAL REQUIREMENTS INSTALLATION GUIDE EXTENSION CORDManual background

 

 

 

 

 

 

 

 

1.

Make sure that all the packing materials

 

5.

For correct operation, the oven must

 

 

 

are removed from the inside of the door.

 

 

have sufficient airflow. Allow 20cm of

 

 

2.

Check the oven for any damage, such

 

 

space above the oven, 10cm at back

 

 

 

as misaligned or bent door, damaged

 

 

and 5cm at both sides. Do not cover or

 

 

 

door seals and sealing surface, broken

 

 

block any openings on the appliance.

 

 

 

or loose door hinges and latches and

 

 

Do not remove feet on which oven

 

 

 

dents inside the cavity or on the door. If

 

 

stands.

 

 

 

there is any damage, do not operate the

 

6.

Do not operate the oven without glass

 

 

 

oven but contact qualified service

 

 

tray, roller support, and shaft in their

 

 

 

personnel.

 

 

proper positions.

 

 

3.

This microwave oven must be placed

 

7.

Make sure that the power supply cord is

 

 

 

on a flat, stable surface to hold its

 

 

undamaged and does not run under the

 

 

 

weight and the heaviest food likely to be

 

 

oven or over any hot or sharp surface.

 

 

 

cooked in the oven.

 

8.

The socket must be readily accessible

 

 

4.

Do not place the oven where heat,

 

 

so that it can be easily unplugged in an

 

 

 

moisture, or high humidity are

 

 

emergency.

 

 

 

generated, or near combustible

 

 

 

 

 

 

materials.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual backgroundManual background GROUNDING INSTRUCTIONS Manual backgroundManual background

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current.

WARNING Improper use of the grounding plug can result in a risk of electric shock.

ELECTRICAL REQUIREMENTS

The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. It is recommended that a separate circuit serving only the oven be provided. The oven is equipped with a 3-prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded.

EXTENSION CORD

1.If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on the microwave oven. The marked

SAVE THESE INSTRUCTIONS

3

Page 4
Image 4
Sears 86030 Installation Guide, Grounding Instructions, Electrical Requirements, Extension Cord, Save These Instructions