4, TheMowerSuspensionArmsandFasteners(shownfull sizebelow)arefoundinBagofParts,
LOCKWASHERHEX NUT
WASHER
RETAINING CLP
5.The Mower Suspension Arms have "FRONT" Stamped between holes. Place the Suspension Arms on Brackets on both sides of Frame. Retain with Retaining Clip (Fig° 14).
6.Slide Mower under Tractor. Deflector to right hand side..
7.Siide Front Suspension Brackets into Mower Brackets, Re- tain with Release Pins (Fig= 15). Turn Depth Adjustment
Knob counterclockwise (_) until it stops,
8, Slide Suspens}on Arms into Rear Suspension Brackets= Retain with Reiease Pins (Fig, 15),
9.Turn Depth Adjustment Knob (Fig. 15) clockwise (/'_) to remove slack from Mower Suspension. Raise Attachment Handle to full up position.
10, Press plunger down and push Attachment Handle forward
to lower mower to ground. Roll D'rlve Belt over Primary Mandrel (Fig. I6),
| O | CLIP |
____00 | C _ | RETAINING |
| O |
|
BRACKET |
|
|
RETAINING | / | WASHER |
CLIP | • |
|
LIFT LINK
STUD
SUSPENSION
ARMLOCKWASHER
HEX NUT
FIGURE 14
DEPTH
ADJUSTMENT
KNOB
\.
ATTACHMENT
HANDLE
REAR
SUSPENSIONMOWER
BRACKETSBRACKET
RELEASE PIN
PiN
FRONT
SUSPENSION
BRACKET
FIGURE 15
MOWER DRIVE
BELT
PRIMARY
MANDREL
FIGURE 16