Sears 917.2565 manual Service And Adjustments, To Replace Headlight Bulb, Interlocks And Relays

SERVICE AND ADJUSTMENTS

TO REPLACE HEADLIGHT BULB

*Raise hood.

,Pull bulb holder out of the hole in the backside of the grill.

=Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

,Close hood.

TO REMOVE HOOD AND GRILL ASSEMBL_ (See Fig, 26)

,Raise hood.

Unsnap headlight wire connector.

Stand in front of tractor. Grasp hood at sides, tilt towarc engine and lift off of tractor.

=To replace, reverse above procedures.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

Check	wiring, See	electrical wiring diagram	in the
Repair	Parts section	of this manual.	HOOD

TO REPLACE FUSE

Replace with 30 amp automotive4ype plug-in fuse. The fuse holder is located behind the dash.

HEADLIGHT

WIRE

CONNECTOR

FIG, 26

23