_u_/iJ/i | , ii i,i, | ill | , ,u, | ii illl ii illlUllllll | Jllnll | IlUllll | iilllllllullull |
ASSEMBLY
HOW TO SET UP YOUR TRACTOR
CONNECT BATTERY (See Figs. 2 and 3)
CAUTION: Do not short battery termi- nals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.
Positive terminal must be connected first to prevent sparking from acciden-
SEAT
PAN
BOX DOOR
t !! gr°unding; | ........... |
•Remove cardboard packing from seat pan and lift seat pan to raised position.
°Open battery box door°
•Remove terminal protective caps and discard.
•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at
•First connect RED batter,] cable to positive (+) terminal with hex bolt, fiat washer, lock washer and hex nut as shown. Tighten securely.
•Connect BLACK grounding cable to negative
°Close battery box door.
Open battery box door for:
°Inspection for secure connections (to tighten hard- ware),
°Inspection for corrosion.
•Testing batter,].
°Jumping (if required).
• Periodic charging.
DISCARD
TERMINAL
POSITIVEPROTECTIVE
(RED) CABLE CAPS
LOCK
HEX WASHER
NUT
FLAT
WASHER
i
HEX
BOLT
NEGATIVE (BLACK) CABLE
FIG. 2
FIG. 3
INSTALL SEAT (See Fig. 4)
Adjust seat before tightening adjustment bolt.
•Remove cardboard packing on seat pan_
•Place seat on seat pan and assemble shoulder bolt.
•Assemble adjustment bolt, lockwasherandflatwasher Ioosefy. Do not tighten.
°Tighten shoulder bolt securely.
°Lower seat into operating position and sit on seat.
=Slide seat until a comfortable position is reached which
aUows you to press clutch/brake pedal all the way down.
,Get off seat without moving its adjusted position.
•Raise seat and tighten adjustment bolt securely.
SEAT
SEAT PAN
SHOULDER
BOLT
FLAT WASHER
ADJUSTMENTWASHER
BOLT
FIG. 4
8