Gear Case Contd, Lubrication, Grass Catcher

MAINTENANCE(CONT'D)

GEAR CASE (CONT'D)

NOTE: The gear case is filled to proper level at the factory° The only time the lubricant needs atten- tion, is if service has been performed on the gear

Case.

The gear case must be filled with grease after gear case has been serviced. Use only multi-purpose automotive grease. Do not substitute.

LUBRICATION

MOWER WHEELS: Lubricating wheels and/or

wheel bearings is not necessary under normal conditions_

Should conditions require lubrication, thoroughly

clean wheels and/or wheel bearings and axles and apply a light coating of dry lubricant such as

white graphite. White graphite is available at Sears retail stores and through the catalog,

REAR DOOR HINGE: Put a few drops of the same oil as used in the engine on hinge points of rear door once or twice each year (See Fig, 22)°

GEAR CASE: The gear case is filled at the factory and does not require any addition of lubricant, unless the gear case is opened and service

performed. Use only a multi-purpose automotive grease for refilling after service has been per- formed° Approximately 2 1/2 oz. required°

FRONT WHEEL ADJUSTERS: Put a few drops of the same oil as used in the engine on the front wheel adjusters once or twice each year (See Fig° 23).

GRASS CATCHER

Check your grass catcher often_ Through normal use it will wear° If catcher needs replacing, re-

place only with a manufacturer approved replace- ment catcher from Sears. Give the mower model

number when ordering,

NOTE: The catcher may be hosed with water, but must be dry when used,

ZONE/CONTROL LEVER

Put one or two drops of the same oil as used in the engine between the zone control lever and bracket located on left rear of engine (See Fig_ 24). Do this once or twice each year_

ZONE/ENGINE CONTROL

Check your zone/engine control cable often for defects or wear and replace if found to be dam- aged or worn,

CLEANING

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in con- tact with the spark plug.

1. Turn mower on its side with carburetor up,

--,,j,

PRESS

L-_

FIG 25

APPROX 1/32

HEX HEAD SCREW

CONTAINER

FIG 27

2_ Clean the underside of your mower by scrap- ing to remove build,up of grass and trash,

NOTE: We recommend that you clean the under- side of your mower after each use.

3.Clean your mower and engine often to keep build-up of trash from accumulating around engine, a clogged engine runs hotter and shortens engine life.

NOTE: We DO NOT recommend using a garden hose to clean mower unless the electrical system, muffler, air filter, and carburetor are covered to keep water out_ Water in engine can result in shortening engine life_

917.372301 specifications

The Sears 917.372301 is a highly regarded lawn tractor that has garnered attention for its impressive performance and thoughtful design. This machine is engineered to cater to both residential and commercial landscaping needs, offering users a robust solution for maintaining lawns effectively.

One of the standout features of the Sears 917.372301 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this lawn tractor delivers sufficient horsepower to tackle even the toughest mowing tasks. Users appreciate the smooth operation and consistent performance, making it an ideal choice for those with expansive lawns or uneven terrains.

The cutting deck is another highlight of the 917.372301. With a width of 42 inches, it provides a wide swath of grass to mow in a single pass, significantly reducing mowing time. The deck is made from durable materials, ensuring resilience against wear and tear. Moreover, the adjustable cutting heights allow homeowners to choose the perfect level for their specific lawn needs, promoting healthy grass growth.

Ergonomics is a key consideration in the design of the 917.372301. The spacious and comfortable seat is designed for prolonged use, ensuring that operators can mow their lawns without discomfort. Additionally, the intuitive controls are well-placed, allowing for easy maneuverability and operation, even for novice users.

Another noteworthy characteristic of the Sears 917.372301 is its maneuverability. This lawn tractor features a tight turning radius, making it easy to navigate around flower beds, trees, and landscaping obstacles. Coupled with smooth steering and responsive controls, users can mow their lawns with precision and ease.

The 917.372301 also boasts several innovative technologies that enhance its efficiency. The inclusion of a hydrostatic transmission allows for seamless speed adjustments without shifting gears. This feature greatly simplifies the mowing process and helps maintain consistent pace, optimizing fuel consumption.

Ultimately, the Sears 917.372301 offers a blend of power, durability, and user-friendly design, making it a formidable contender in the lawn tractor market. Whether you are a homeowner looking to maintain a beautiful lawn or a professional landscaper tasked with managing larger properties, the 917.372301 is equipped to meet your needs, transforming lawn care into a more enjoyable and efficient task. Its combination of essential features and advanced technologies make it a worthy investment for anyone serious about their lawn maintenance.

Sears 917.372301 manual Gear Case Contd, Lubrication, Grass Catcher, ZONE/CONTROL Lever, Cleaning

Models: 917.372301