SERVICE AND ADJUSTMENTS
TO ADJUST HANDLE (See Figs. 16 Thru 18)
SHIPPING PosmoN
Your lawn mower handle canbe raised or lowered for your
mowing comfort. Four (4) positions are available: high,MEDIUM LOW medium high, medium low and low. Handles are shipped
mounted in the medium low position.
MEDIUM HIGH
•To change from medium low to medium high position, the upper and lower handle sections will have to be turned over (See Fig. 16B).
Remove the controls and operator presence control bar from the upper handle.
•Remove the starter rope guide from the lower handle.
•Remove hairpin cotters.
•Disconnect the lower handle from the handle brackets (See Fig. 18).
Turn the handle over and reassemble the hairpin cotters that have been removed.
•Reassemble the starter rope guide.
•Reassemble the controls and the operator presence control bar to the upper handle.
&trol bar must pivot freely to permit blade brake engagement when control bar is released. Do not over tighten the fas-
teners holding the controls to the up- per handle.CAUTION: The operator presence con-
To change from medium low to high position only the upper handle section will have to be turned over (See Fig. 17A).
To change from medium low to low position, only the lower handle section will have to be turned over (See Fig. 17B).
ENGINE
ENGINE SPEED
Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to an authorized service center/ department for repair and adjustment.
CARBURETOR
Your carburetor has a
FIG. 16A
F
HIGH
FIG. 17A
SQUEEZE
FIG. 16B
LOW
FIG. 17B
LOWERHANDLE
HANDLE
BRACKET
HAIRPIN COI"FER
FIG. 18
16
