Shipping position
_,__i Medium
LOW
..,a
High
\\
" To change from medium low to high position only the upper handle section will have to be turned over.
o To change from medium low to tow position, only the lower handle section wil! have to be turned over.
immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more.
LAWN MOWER
When lawn mower is to be stored for a period of time, clean it thoroughly, remove a}t di& grease, leaves, etc. Store in a dean, dry area. o Clean entire lawn mower (See "CLEANING"
in the Customer Responsibilities section of
Lower handle
\
Squeez e remove
Hairpin clip | Mounting |
| bracket |
ENGINE ,CARBURETOR
.YourcaiStiretor has, a
ENGINE S_EED
The engine speed has been facto,_ set, Do not attempt to increase engine speed as it may result in personal injury. If you believe the engine is runfling too .fast or too slow_ take your lawn recover to an authorized service center for repair and adjustment.
IMPORTANT; When folding the handle for storage or transportation, be sure to fold the
handie as shown or you amy damage the control cables.
. When setting up your handle from the storage position, the lower handle Will automatically lock into the mowing position.
X x | Lower handle |
this manual).
oLubricate as shown in the Customer Responsib_ities section ofthis manual.
. Be sure that all nuts, bolts, screws, and pins
aresecuretyiastened..Inspect moving paris for damage; breakage and wear. Replace if necessary.
N
Squeeze to
remove
Hairpin clip
Mounting bracket
o Touch up alt rusted or chipped'paint
surfaces; sand lightly before painting.
HANDLE
,you can fold your lawn mower handle for storage.
Squeeze the bottom ends oflhe lower handle toward each oU_er until the lower handle clears the handle bracket, then move handle forward_
°.Loosen upper handle mounting bolts enough to allow upper handle to be folded back
Operator presence control bar
Upper handle | ._ | up |
Lift | up |
|
t
Mowing posflJor
Lower handle
12
