IMPORTANT
SAFETY INSTRUCTIONS (contfd)
HAZARD
RISK TO BREATHING
RISK FROM FLYING OBJECTS
RISK FROM MOVING PART:
RISK OF BURN
SC0M1098
WHAT | CAN | HAPPEN | |
The OM | SED | A | from your |
compressor | NOT | FOR | |
_! | The air stream | may contain | |
carbon monoxide or other toxic vapors, or particles from the tank or other components.
SPRAYED MATERIALS such as paint, paint solvents, paint remover, insecticides, weed killers, etc., CONTAIN HARMFUL VAPORS and poisons.
The COMPRESSED AIR STREAM CAN cause soft tissue _damage, and can
PROPEL dirt, chips, loose
and small objects at high speed, resulting in property damage or personal injury.
The COMPRESSOR CYCLES
AUTOMATICALLY WHEN the
PRESSURE SWITCH IS IN THE ON/ AUTO POSITION! If you attempt repair or maintenance while the compressor is operating, or with the switch in the ON/ AUTO position, you can expose yourself to moving parts. These MOVING PARTS
CAN CAUSE SERIOUS INJURY or damage if they come into contact with you oryour clothin_
Contact with HOT PARTS such as the
compressor head or outlet tubes
COULD RESULT IN A SERIOUS SKIN BUNt
HOW TO PREVENT IT
NEVER INHALE AIR FROM TH E
_,either directly or from a breathing device connected to the compressor. WORK IN AN AREA
equipped WITH GOOD CRO -
VENTILATION.
Read and FO W TH AFET INSTRUCTIONS provided on the label or safety data sheet FOR THE MATERIAL YOU ARE SPRAYING. USE A NIOSH/
MSHA APPROVED RESPIRATOR
designed FOR use with YOUR specific
APPLICATION.
ALWAYS WEAN ANSI Z87.1 APPROVED
SAFETY GLASSES with side shields when using the compressor.
NEVER POINT any nozzle or SPRAYER toward any part of the body or AT
or animals.
Always TURN the COMPRESSOR
AND BLEED E S R from the air
line _ | attempting maintenance, | ||
A | C | ING TO | or accessories. |
Always UNPLUG the COMPRESSOR AND RELEASE AIR PRESSURE from the
tank and any attachments BEFORE
ATTEMPTING any MAINTENAN OR
REPAIR.
NEVER OPERATE the
WITH GUARDS or covers which are damaged or _.
NEVER TOUCH HOT COMPONEN'F_ during or immediately after operation of the compressor. Do not reach around
protective shrouds or attempt maintenance until unit has been allowed to cool.
4 _ Eng
