Sears 934.4482639 owner manual Channel 0e, STAreTI.,,IA, Set +, STAmd ..E, €-q

[_lllB_][4J_idld_,I_ d;ILV_l

You may set the TV/VCR to start and end recording one program within 24 hours by simply pressing QUICK SET PROGRAM button on the TV/VCR.

It is easy for you to record today's TV program.

•Power must be on to set Quick Set Program.

•Clock must be set to the correct time before setting the timer.

•Quick Set Program is memorized to program number 8.

In the example below, the Quick Set Program is being set to record:

SETTING TIME from 10:00PM to ll:00PM

CHANNELCH10

TAPE SPEEDSP Current time is 8:00PM.

Note: This function is not operative with the remote control.

Insert a cassette tape with its erasure prevention tab in place, if necessar_ rewind or fast forward the tape to the point at which you want to begin

recording. Timer display will be changed to the Counter mode.

Press SET "+" or "-" button until your desired start time hour is displayed. (Example: 10)

		.(_Jl_N SET	P ROC_AM-
VCHANNEL		•
_-q	c-----}	E.DTI.E"!.): --
	SET +	CHANNEL0e
		TAPE SPEED	SLP

IBI

Press SET "+" or "-"button until your desired start

time minute is displayed.

(Example:	00)
			-QUICK SET pROGRAM-
VCHANNEL		•	DATE	0_ THU
			-STAreTI_.,,'_'IA,
CZZZ3	_---q
			END TIME	--: ....
SET +			CHANNEL	0e
			TAPE SPEED	SI.P

Press SET "+" or "-" button until AM or PM is

displayed. (Example:		PM)
		-QUICK	SET	PROGRAM.
VCHANNEL	•	DATE		0_'25THU
		-s'r^m.,.,o,E_._<:,*
				._..a _,
SET	+	END	TIME
		CHANNEL		0e
		TAPE	SPEED

Press QUICK SET PROGRAM button on the TV/VCR.

MON ITOR	-OUK_KSET PROgRAM-
	DATE	l O 5 THU
CZD	.STAm'd_..E
QU ICK SET	CHANNEL	¢e
PROGRAM
	TkPE _EED

NOTE:

1)Key inputs for steps[2]~[10] should be

done within 2 seconds, otherwise input mode will forward to next mode.

2)You mayforward to next step when you

press SELECT button on the TV/VCR. 3)When you press CLEAR button on the TV/VCR, all input data will be erased and return to initial display (step [2]).

O

Press SET	"+" or	"-" button until your desired end
i_me hour	is displayed.		(Example:	11)
VCHANNEL		•	-QU_K	SET PROGRAM-
			DATE	0_25 THU
_	CZZZ3		STARTTIME ,!0:1_ PM
			--ENDTl_? 'i,'P.
SET +			CHANNEL*'*fDe"_
			TAPE	SPEED ,_.P

Press SET "+" or "-" button until your desired end time minute is displayed. (Example: 00)

-QUICK SET pROGRAM*

VCHANNEL			4,	DATE	03/25	THU
r--_}	€'_-q			STARTTIME lO_		PM
	SET	+		CHANNEL	_	"N

TAPE SPEED SkP

- 25 -