OPERATION

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START - ELECTRIC STARTER

Follow the steps above, keeping the choke control in the "OFF" position.

COLD START - RECOIL STARTER

1.Insert safety ignition key (tied to recoil start cord) into ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ignition key in a safe place.

2.Place ON / OFF switch in "ON" position.

3.Rotate choke control to "FULL'position.

4.Push the primer four (4) times if the temperature is below 15°F, or two (2) times if temperature is between 15° and 50°R If temperature is above 50°F, priming is not necessary.

NOTE: Over priming may cause flooding, preventing the engine from starting. If you do flood the engine, wait a few minutes before attempting to start and DO NOT push the primer.

5.Pull recoil starter handle quickly. Do not allow starter rope to snap back.

6.When the engine starts, release the recoil starter handle and slowly move the choke control to the "OFF" posi- tion.

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START - RECOIL STARTER

Follow the steps above, keeping the choke in the "OFF" position. DO NOT push the primer.

BEFORE STOPPING

Run the engine for a few minutes to help dry off any mois- ture on the engine.

iF RECOIL STARTER HAS FROZEN

If the recoil starter has frozen and will not turn the engine, proceed as follows:

1.Grasp the recoil starter handle and slowly pull as much rope out of the starter as possible.

2.Release the recoil starter handle and let it snap back against the starter.

If the engine still fails to start, repeat the above steps or use the electric starter.

SNOW THROWING TiPS

•Go slower in deep, freezing or heavy wet snow. Use the drive speed control, NOT the ON / OFF switch, to adjust speed.

•It is easier and more efficient to remove snow imme- diately after it falls.

•The best time to remove snow is the early morning. At this time the snow is usually dry and has not been ex- posed to the direct sun and warming temperatures.

•Slightly overlap each successive path to ensure all snow will be removed.

eThrow snow downwind whenever possible.

eAdjust the skid plates to proper height for current snow conditions. See "TO ADJUST SKID PLATES" in this section of this manual.

•For extremely heavy snow, reduce the width of snow removal by overlapping previous path and moving slowly.

•Keep engine clean and clear of snow during use. This will help air flow and extend engine life.

•After snow-throwing is completed, allow engine to runfor a few minutes to melt snow and ice off the engine.

•Clean the entire snow thrower thoroughly after each use and wipe dry so it is ready for next use.

WARNING: Do not operate snow

&thrower if weather conditions impair visibility. Throwing snow during a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the snow thrower.

14

Page 13 Page 15
Page 14
Image 14
Sears 944.528117 Warm Start Electric Starter, Cold Start Recoil Starter, Warm Start Recoil Starter, Before Stopping
Page 13 Page 15

944.528117 specifications

The Sears Model 944.528117 stands as a testament to the ingenuity of home appliances during its time. Known for its combination of functionality and reliability, this model gained popularity among households seeking efficiency and performance in their everyday chores. The Sears 944.528117 is a washing machine designed to cater to a wide range of laundry needs, all while ensuring ease of use and energy efficiency.

One of the standout features of the Sears 944.528117 is its user-friendly control panel. The intuitive design allows users to effortlessly select various wash cycles and settings, ensuring that any type of fabric or load size is adequately addressed. The machine comes equipped with multiple wash cycles, including options for delicate fabrics, heavy-duty loads, and quick washes. This versatility ensures that users can tailor their laundry experience to the specific needs of their garments.

Another significant characteristic of the Sears 944.528117 is its water efficiency. The washing machine integrates advanced technologies that optimize water usage, thereby minimizing environmental impact while still delivering excellent cleaning results. This feature is particularly appealing to eco-conscious consumers who are looking for sustainable options in their home appliances.

In terms of performance, the Sears 944.528117 employs a high-speed spin cycle that effectively removes excess water from clothes, significantly reducing drying time. This not only enhances user convenience but also contributes to energy savings by reducing the need for prolonged dryer use.

Furthermore, the machine's durable construction ensures longevity, making it a reliable investment for any household. Its robust design also minimizes vibrations during operation, resulting in quieter washes and a more pleasant laundry experience overall.

For convenience, the Sears 944.528117 features a large capacity drum, allowing users to wash larger loads at once. This is particularly beneficial for families or individuals with busy lifestyles, as it reduces the number of laundry cycles needed and saves valuable time.

In summary, the Sears 944.528117 offers a blend of functionality, efficiency, and durability. With its user-friendly interface, versatile wash cycles, water-saving technologies, high-speed performance, and spacious design, it represents a practical solution for modern laundry needs. This model remains a reliable choice for those seeking dependable performance in their washing machine.
Top Page Image Contents