![Fig. l_Typical Crankcase Heater Installation](/images/new-backgrounds/45181/451813x1.webp)
( NOTE: TOP CONDENSER SECTION NOT SHOWN )
COMPRESSOR | ROUTE WIRES | INDOOR FAN MOTOR |
| AS SHC_'N |
|
CRANKCASE
HEATER
CONTROL BOX
/_HEATERCLIP
C01015
Fig. l_Typical Crankcase Heater Installation
CH
c | c |
--
LEGEND
C-- Compressor Contactor
CH
<_) Marked Terminal
C01014
Fig. 2--Crankcase Heater Wiring
7.Connect one black lead to the compressor contactor terminal
11, and connect other black lead to compressor contactor
terminal 21. (See Fig. 2.)
8.Attach green crankcase heater ground lead to ground screw in control box.
9. Replace access panel.
10. Turn on main power, then (if applicable) gas supply.
Copyright 2001 Carder Corporation | 582a1812 |
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
PC 101 | Catalog No. | Printed in U.S.A. | Form | Pg 2 | Replaces: |