USAGE OF THE VIEWFINDER CAP
The self-timer enables you to include yourself in your own photographs for commemorative occasions etc.
1.After advancing the film, press the Self-Timer Switch.
2.The Self-Timer Indicator Light will pulsate with an electronic sound, and about 10 seconds later, the shutter will be released.
3.If you wish to cancel the self-timer once it has started operating, set the Shutter Speed Dial to L (Lock) or B (Bulb).
*If the film has not been advanced, the self-timer will not operate.
Viewfinder Cap
When using the self-timer with the A (Auto) setting, to avoid incident light reversal from the light entering the viewfinder eyepiece and causing incorrect exposure, use the Viewfinder Cap attached to the
strap to cover the viewfinder eyepiece.
[NOTE: Mike B. - This item is useful if you are metering those longer shutter speeds (1/4 to 16 sec.) in "Auto" mode as you normally are not looking through the viewfinder. Light from the rear can effect the meter reading.
20. DEPTH OF FIELD
