Sears KS-2 3. INSERTING THE BATTERIES

1.Line up the red dot on the lens mount with the matching red dot on the camera body. or alternatively. match the red (dot) mark on the Depth of Field Scale to the red dot on the camera body.

2.When the lens has engaged. turn it in the direction of the arrow until it clicks into place.

*For convenience when mounting the lens in the dark. you can line up the Lens Mounting Locator Node with the Lens Release Lever.

*Since the body cap has the same mount as the lens. You can remove or mount lens cap in the same way as the lens.

3. INSERTING THE BATTERIES

The exposure metering and shutter operation of this camera are powered by batteries, so it is important to insert the batteries correctly for correct operation.

1.Remove the Battery Compartment Cover by turning it counterclockwise with a coin.

2.Place the two batteries on top of each other as shown in the illustration on the battery holder of the Battery Compartment Cover.