2.1Detaching the arm/stand (for VESA wall mount)

The detachable stand of the VW199 Series LED monitor is specially designed for VESA wall mount.

To detach the arm/stand:

1.Remove the arm cover.

2.Have the front of the monitor face down on a table.

3.Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows.

4.Detach the stand from the monitor.

We recommend that you cover the table surface with soft cloth to prevent

damage to the monitor.

Hold the stand of the monitor when you remove the screws.

screws

• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.

2-1

Chapter 2: Setup

Page 12
Image 12
Sears VW199 manual Detaching the arm/stand for Vesa wall mount, To detach the arm/stand