ENFORCER DR-1 Series DVR Quick Setup Guide
4 SECO-LARM U.S.A., Inc
Rear Panel:DR-104Q:
DR-108Q / DR-116Q: (DR-116Q shown)
Rear panel feature descriptions:
1
LAN 10/100M (RJ-45)
Use a Cat5e/6 cable to connect the DVR to a Local Area Network for remote access.
2
PS2-Compatible
USB Port
Provides connection point for a PS2-compatible USB mouse.
Note: PS2-compatible USB port does not support USB mice, flash drives, or
other USB devices.
3
VGA Output
Allows the DVR to output to a computer monitor or other VGA device.
4
Alarm I/O Input
Allows the DVR to connect to alarm I/O and other RS-485 devices.
5
Video Out /
Main Monitor
Allows the DVR to output a video signal to a security monitor using a coaxial cable.
6
Audio Out/
Main Audio
Allows the DVR to output an audio signal to an audio device using an RCA cable.
7
Call Monitor
Allows the DVR to output a video signal to a secondary monitor using a
coaxial cable. (DR-108Q and DR-116Q)
8
Call Audio
Allows the DVR to output an audio signal to a secondary audio input device using an
RCA cable. (DR-108Q and DR-116Q)
9
Video Input
Provides a connection point for video streams from cameras using coaxial cables.
10
Audio Input
Provides a connection point for audio sources.
11
Power Jack
Connect a 12VDC power source.
12
Ground Screw
Connect to earth ground to prevent electrical damage to DVR.
2
4
6
5
9
11
12
7
8
10
3
1
1
3
2
5
4
6
9
10
11
12