SECO-LARM USA EV-122B-4 technical specifications Dome Cameras, With Multi-Axis Gimbal Brackets

Dome Cameras

With Multi-Axis Gimbal Brackets*

Model	Lens	Angle	Type
EV-1223C12	4.3mm	78°	Color
EV-122C-2	2.9mm	120°	Color
EV-122B-4	4.3mm	78°	B/W

Viewing angles are approximate

SECO-LARM offers both Black & White and Color Dome Cameras for use in those applications which require an attractive, inconspicuous look. SECO-LARM dome cameras offer high resolution with low lux in a compact and durable enclosure.

Technical Specifications:

*For ceiling or wall mounting

Wire

HarnessLens

Screw	Screw
Support	Support	Wire	Support
Bracket	Bracket	Harness	Bracket

For wall mounting. Remove the 2 screws and turn the lens 90o clockwise until the wire harness is adjacent to the support bracket, then replace the 2 screws to secure it.

Type

Chip

Resolution

Pickup elements

Scanning system

Sync

Video output

Lens

Viewing Angle*

Minimum illumination Gamma correction S/N ratio

Shutter control

Backlight compensation Gain control

White Balance D/A Bits Power source Power consumption Operating temperature Dimensions

Color Cameras	B/W Camera
1/3” CCD, Sony	1/3” CCD, A1 PROs

420 TV lines

512 x 492 pixels (NTSC / EIA)

2:1 interlace

Internal

1V pp composite output, 75 ohms EV-1223C12 / EV-122B-4 (4.3mm)

EV-122C-2 (2.9mm)

EV-1223C12 / EV-122B-4 (78°)

EV-122C-2 (120°)

0.1lux

0.45

>48dB (AGC off)

Auto Electronic Shutter (AES)

1/60~1/100,000 sec. (NTSC / EIA)

Auto & Manual

Auto

AWB N/A

10

12VDC

110mA100mA 14°~140° F (-10°~60° C) 31/2” x 21/4” (88 x 57 mm)

Copyright 2007 SECO-LARM U.S.A., Inc. All rights reserved.

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

	1.949.261.2999 (CA & Int’l)	1.800.662.0800	Fax: 1.949.261.7326	®
16842 Millikan Avenue, Irvine, CA 92606
	Email: info@seco-larm.com	Website: www.seco-larm.com		BasicDomeCamsb.cdr