SECO-LARM USA EV-2786-PKEQ manual Specifications, Parts List, Dimensions, Applying the Rubber Seal

SECO-LARM Large IR Vandal Dome Cameras

Specifications:

		NTSC	EV-2186-NKEQ		EV-2786-NKEQ
		PAL	EV-2186-PKEQ		EV-2786-PKEQ
Type			Vandal Dome Camera
CCD			1/3” Sony Super HAD II CCD
Resolution			420 TVL		540 TVL
Lens			2.8~11mm		DC Auto Iris
# of IR LEDs			18 (850nm)
IR range			50~65 ft (15~20 m)
Pickup	NTSC		510x492 pixels		768x494 pixels
elements	PAL		500x528 pixels		752x582 pixels
Sync				Internal
Video output			1Vp-p composite video, 75Ω
Minimum illumination			0-lux (LEDs ON)
S/N ratio				>48dB
Shutter control			DC auto iris
Gain control				Auto
White balance				Auto
Operating voltage			12VDC ±10%
Current	LEDs OFF			80mA
draw	LEDs ON			280mA
IP Rating				IP65
Operating temperature			-4°~122° F (-20°~50° C)
Dimensions			51/2”x41/2” (140x115 mm)
Weight			27-oz (752g)

Parts List:

1 x Camera	4 x Mounting screws	1 x DC plug with terminal block
1 x Manual	4 x Screw anchors	1 x Allen wrench

Dimensions:

41/2” (115mm)

51/2”

(140mm)

Applying the Rubber Seal:

If using the camera outdoors, use the rubber seal. To use, remove the backing and apply to the camera base.

2 SECO-LARM U.S.A., Inc.