SECO-LARM USA SD-961A-36 specifications Push-to-ExitBar, Features, Rugged, heavy-dutyconstruction

SECO-LARM®

Push-to-Exit Bar

SD-961A-36

Designed to allow egress from inside an area normally locked by an electric lock or electromagnetic lock, and/or to disarm (shunt) or trigger an alarm when the door is opened.

Features:

Rugged, heavy-duty construction.

New!

Easier to Install!

New end caps come off and go on in seconds.

Now includes complete mounting hardware for hollow doors.

DIMENSIONS:

Total, including end caps:

Pushing the bar at any point sends a signal to release

23/4” (70mm)

341/2” (876 mm)

the lock and/or sound an alarm.

Without end caps. 321/4” (819 mm)

219/32”

For 36 inch doors (actual length is 34.5 inches). Can be cut to size.

Two built-in non-latching (momentary), dual-contact switches (NO/COM/NC). -- 5 Amps @ 125VAC.

Attractive brushed-aluminum bar with black base and trim.

Includes SECO-LARM SD-969-A18 Armored Door Cord, and mounting hardware for mounting on wood or metal doors.

(66mm) 213/32” (61mm)

2” (50mm)

SPECIFICATIONS:

	SD-961A-36
Circuit Type	2 Built-in non-latching (momentary)
	N.O. or N.C. Contacts
Contact Rating	5 Amps @ 125VAC
Size	For 36” doors. Actual size 34.5”
Weight	7 lbs. (3kg)
	PushBar_New2.pmd

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

SECO-LARM®U.S.A., Inc.,	16842 Millikan Avenue, Irvine, CA 92606		Tel: 1-800-662-0800 (Domestic U.S. & Canada)
Tel: 1-949-261-2999 (California & International)	Fax: 1-949-261-7326	Email: info@seco-larm.com		Website: www.seco-larm.com

Copyright ©2005 SECO-LARM U.S.A., Inc.