SECO-LARM USA specifications Enforcer, Access, Model SD-997A, Features, Connection, Diagram

ENFORCER®

Access

Note that cylinder extends past lock on both sides.

Electric Deadbolt for Fail-Secure Applications

Model: SD-997A

Adds concealed deadbolt security to most wood or hollow metal doors, with the added convenience of electrical operation.

Features:

Fail-secure operation (locks if power is lost). Stainless steel bolt, 5/8” diameter, 5/8” throw.

Includes control wire which allows for releasing without cutting unit’s power.

Door open/close monitor (NO/C/NC).

Magnetic switch senses door position for positive locking.

Solenoid attempts to lock several times and then shuts down if door not closed properly to prevent solenoid from burning out. Once door closed properly will automatically lock.

Adjustable door lock delay timer - (0, 3, 5, or 9 seconds).

1.5-Amp over-current protection. Includes all necessary hardware.

SD-997B- Similar to SD-997A but for Fail Safe operation (also does not include locking cylinder or second wire connector).

Key

Lock knob

Incorporates manual lock/unlock cylinder to operate the SD-997A if power is lost (turn lock knob from inside protected premises and/or use key from outside protected premises).

Connection		Card reader	Push
		or keypad
Diagram:	N.C.	COM	button
	N.O.

Dimensions:*

39/16” (90mm)

Door lock

Sensor Magnet

(25.7mm)

delay timer

Orange wire

*Note: Inches are closest

(18mm)

12VDC

11/ ”16

1”

Brown wire

1/16” approximation.

Red wire

1Amp

only

Green wire - door monitor, COM

Yellow wire - door monitor, N.C.

15/16” (24.5mm)

Blue wire - door monitor, N.O.

77/8” (200mm)

Purple wire - manual N.C.

{

For

Gray wire - manual COM

SD-997A

Black wire - manual N.O.

only

1/4” (5.6mm)

(16mm)

(31.8mm)

11/4”

5/8”

Specifications:

Bolt

SD-997A

SD-997B

5/8” (16mm) Throw

3/4”

Operation

Fail-Secure

Fail-Safe

(19mm)

37/8” (98mm)

21/4” (58mm)

1” (25mm)

1/8

Standby: 320mA

Standby: 360mA

”

Current Draw

(3mm)

Activated: 880mA

Activated: 900mA

Bolt

(37.5mm)

Status Sensor

SPDT, 500mA @ 12VDC

11/”2

(N.O./C./N.C.)

Operation Voltage

12VDC

Adjustable Delay Timer

0, 3, 5, 9 sec.s

0, 2.5, 5, 9 sec.s

61/8” (156mm)

Weight (approx.)

2lbs., 5oz. (1kg)

1lb.,13oz. (0.82kg.)

SD997A.pmd

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

SECO-LARM®U.S.A., Inc., 16842 Millikan Avenue, Irvine, CA	92606 Tel: 1-800-662-0800 (Domestic U.S. & Canada)
Tel: 1-949-261-2999 (California & International) Fax: 1-949-261-7326 Email:	info@seco-larm.comWebsite: www.seco-larm.com