Door Closer Installation Manual
Fig. 2 -- Parts List
2 x 3/16" UNC Arm Door Frame Bracket Screws
4x 3/16" - 24 Door Closer Body Attachment Screws
1x Arm Axle Screw
1x Arm Assembly
1 | x Axle Cap | Axle Cap | |
1 | x Cover Plate | ||
|
Door Closer Body
Latch Speed
Adjustment Screw
Sweep Speed
Adjustment Screw
Fig. 3
Door Closer Installation Manual
Adjustment:
1.Arm adjustment: (see Fig. 4).
•Loosen jam nut on adjustment arm.
•Thread arm in or out until adjustment arm is at 90 degree angle from the door frame.
•Tighten jam nut.
2.Closing speed adjustment: (see Fig. 5)
•Adjust sweep speed to the desired closing speed.
•Adjust latch speed so that just before the door closes all the way it slows just before latching.
Fig. 4 |
|
Adjust arm to 90o angle from door | Adjust arm to 90o angle from door |
90o | 90o |
Installation:
Fig. 5
Step 1
Sweep Faster
speed adjustment
Slower
Step 2
Latch Faster
speed adjustment
Slower
1.Determine the type of door swing (see Fig 3).
2.Select the appropriate template (Right Hand or Left Hand). Attach the template to the door.
3.Mark the mounting holes. 4 holes for the door closer body and 2 holes for the door frame arm bracket.
4.Drill pilot holes for the screws.
5.Attach the door closer to the door and frame.
6.Adjust the door closer (see caution at the front of the manual).
Note: See template for location of adjustment screws.