1. HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely.
WARNING!
●Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit. In the case work should be performed in the status of power on, this manual always states to that ef- fect.
●To avoid electric shock or short circuit, do not plug in or unplug quickly.
●To avoid electric shock, do not plug in or unplug with a wet hand.
●Do not expose Power Cords and Earth Wires on the surface, (floor, passage, etc.). If exposed, the Power Cords and Earth Wires are susceptible to damage. Damaged cords and wires can cause electric shock or short circuit.
●To avoid causing a fire or electric shock, do not put things on or damage Power Cords.
●When or after installing the product, do not unnecessarily pull the power cord. If damaged, the power cord can cause a fire or electric shock.
●In case the power cord is damaged, ask for replacement through where the product was purchased from or the office herein stated. Using the cord as is damaged can cause fire, electric shock or leakage.
●Be sure to perform grounding appropriately. Inappropriate grounding can cause an electric shock.
●Be sure to use fuses meeting specified rating. Using fuses exceeding the specified rating can cause a fire or electric shock.
●Completely make connector connections for IC BD and others. Insufficient insertion can cause an electric shock.
●Specification changes, removal of equipment, conversion and/or addition, not desig- nated by SEGA are not permitted.
•Failure to observe this may cause a fire or an electric shock.
•SEGA shall not be held responsible for damage, compensation for damage to a third party, caused by specification changes not designated by SEGA.
●Be sure to perform periodic maintenance inspections herein stated.
1 | www.seuservice.com |
